New help adjusting my hood.

Will'sBimmer · 11-14-2007, 08:00 PM

I am having problems with my hood. It is over more towards the driver's side. I was wondering if there is any way I can adjust it to where it sits even on the car. Can anyone help me???

And just in case you can't seem to picture this. I will explain again. The hood is over to the driver's side too much and on the passenger side it leaves a small gap between hood and fender. Thanks for any help.

tiFreak · 11-15-2007, 04:27 PM

You may need to un-bolt the hood and move it over on the hinges.

thesk8nmidget · 11-15-2007, 04:52 PM

Quote:

Originally Posted by tiFreek

You may need to un-bolt the hood and move it over on the hinges.

if you loosen the bolts just a little you can easily adjust and slide around where you want it to sit

tiFreak · 11-15-2007, 04:59 PM

Yeah that's what I ment.

Will'sBimmer · 11-15-2007, 09:38 PM

thanks for the help you guys

thesk8nmidget · 11-15-2007, 09:41 PM

anytime

React · 11-18-2007, 09:37 AM

Mine is doing that.. It's sticking up higher about 1/8" on the passenger side.. My rear window is also raising up a little on the drivers side.. Seems time to replace suspension.

mohaughn · 11-18-2007, 03:47 PM

A worn out suspension will not cause the unibody to twist.. That sounds more like frame damage.

thesk8nmidget · 11-19-2007, 04:51 PM

does it have a salvaged title? or can you tell if it has been it a wreck before?

React · 11-20-2007, 12:22 AM

Doesn't have a salvage title and from what previous owners said, it has never been in a wreck before..

.	Powered by site supporters vBulletin Version 3.8.8 Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Copyright ©1999 - 2024, 318ti.org © vBadvanced CMPS v3.2.2 [page compression: 96.11 k/115.06 k (16.47%)]
318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.