318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Interior and ICE

Notices

Interior and ICE For all interior and In Car Entertainment discussion.

.
» Recent Threads
1999 M-Sport For Sale
12-31-2023 05:10 PM
Last post by Coop540iT
03-23-2024 06:39 PM
1 Replies, 97,908 Views
Once again 318ti owner...
03-20-2024 12:39 PM
Last post by two30grain
03-22-2024 02:04 PM
1 Replies, 60,771 Views
What brakes do I...
03-20-2024 03:27 PM
Last post by huirtera
03-20-2024 03:27 PM
0 Replies, 58,116 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 04-13-2019, 03:01 AM   #1
chevale
Member
 
Join Date: Jul 2015
Location: Toronto, ON, Canada
Posts: 32
Vehicles
iTrader: (0)
Default Installing euro under-dash shelves to North American 318ti.

Hi all:
I've got euro under-dash parts with shelves and tried to install the left one.




This is a part that suppose to protect driver's knees in case of the accident. After 20+ years it became hard like a stone.


When I removed three bolts holding the knee bolster, I found that behind it there is a huge bracket welded to the reinforced tube.






On the left side reinforcement bar is bolted to the body, but I haven't found where the right side of the bar ends and how it is secured.


If anyone installed the euro parts to North American car, I would appreciate the info how one can easy remove the reinforcement bar.
__________________
Stuff for sale.

Last edited by chevale; 04-13-2019 at 03:58 AM.
chevale is offline   Reply With Quote
Old 04-14-2019, 09:52 AM   #2
John Firestone
Senior Member
 
John Firestone's Avatar
 
Join Date: Nov 2004
Location: Bremerhaven, Germany
Posts: 977
iTrader: (0)
Default

Quote:
Originally Posted by chevale View Post
... This is a part that suppose to protect driver's knees in case of the accident. After 20+ years it became hard like a stone.
It probably has always been that way and is still not so hard in a severe crash.

Far be it from me to discourage a fun mod, but the knee bolster addresses safety deficiencies revealed by an NCAP crash test of a Euro E36 sedan without the bolster. From the report you can download:

Quote:
... The driver's left knee struck the lower facia to the left of the steering column. Protection for that knee, thigh and pelvis was down-rated from 'good' to 'marginal': if the knee had impacted in a slightly different position horizontally or vertically, it could have hit the steering column or its adjuster locking bracket. The steering column, its adjuster or its mounting bracket could also have caused localised knee injuries.

The driver's right knee struck the facia to the right of the steering column. Protection for the knee, thigh and pelvis was down-rated from 'weak' to 'poor': if this knee had been in a slightly different position, it could have struck a steering column stabilisation tube or a facia support bracket. Such rigid structures could also have been hit if the knee had penetrated the facia further. Furthermore, the column adjuster or facia brackets could have produced localised injury, as could the brake pivot or column stabilising tube....
That was wearing a seat belt.

Last edited by John Firestone; 04-14-2019 at 10:05 AM.
John Firestone is offline   Reply With Quote
Old 04-16-2019, 12:08 AM   #3
chevale
Member
 
Join Date: Jul 2015
Location: Toronto, ON, Canada
Posts: 32
Vehicles
iTrader: (0)
Default

Quote:
Originally Posted by John Firestone View Post
It probably has always been that way and is still not so hard in a severe crash.

Far be it from me to discourage a fun mod, but the knee bolster addresses safety deficiencies revealed by an NCAP crash test of a Euro E36 sedan without the bolster. From the report you can download:



That was wearing a seat belt.
Thanks, John! Interesting read. I noticed that some US/Canada BMWs from 80-ies and 90-ies had different panels on knee level, when compared with the same European models. Might be that safety standards are different.
__________________
Stuff for sale.
chevale is offline   Reply With Quote
Old 04-16-2019, 09:49 AM   #4
John Firestone
Senior Member
 
John Firestone's Avatar
 
Join Date: Nov 2004
Location: Bremerhaven, Germany
Posts: 977
iTrader: (0)
Default

Europe had no effective safety standards until 1998, and that took forceful intervention by the the European Parliament against the recalcitrant European automakers. North American E36s are safer thanks to the then, considerably more influential, U.S. NHTSA [small NCAP PDF] and U.S. regulations.

EDIT: The regulations only limit injuries to the head, neck and chest (see S6.x). They also require a dummy stay inside the car. I suspect BMW added the knee panel after an older crash test, as part of the above, voluntary New Car Assement Program (NCAP).

Last edited by John Firestone; 04-16-2019 at 11:14 AM.
John Firestone is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: 318ti rear euro lights 1LoudTI US and North America 21 03-30-2007 09:10 PM
1995 BMW 318ti - 1999 One Lap of America Car Jared US and North America 2 01-16-2007 04:13 AM
318ti Dash swap ELIBEEMER Interior and ICE 9 12-22-2005 06:44 PM
318ti dash and lower console in black ELIBEEMER US and North America 0 08-08-2005 07:19 PM
m50tu from 92 525i euro to 318ti hsvbama318ti Engine Swaps 1 04-26-2005 09:56 PM


All times are GMT +1. The time now is 03:26 PM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 75.33 k/87.31 k (13.72%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.