16x8 gold/polished BBS refurb project

[tiFreak]

Originally Posted by tylercM3

and its on uneven ground.

oh, might be why

[AcE]

reminds me or a subaru. I've seen lots of sti's with this color scheme.

[trickiekid]

Did you just use a wire brush to polish them?

[sculler2x]

Have you had any problems with wheel bearings? How uniform is the tire wear? How did you paint the plastic center covers?

[jae_rex]

I'm getting a set of these tonight. Did you need to run any spacers in the front to clear the struts? Thanks in advance.

[spidertri]

The offset is already super low on these, running spacers would make things worse.

[jae_rex]

So then are they are direct fit? That is my question. I can just slap them on w/o any issues? I will be running 205/50/16's.

Thanks

[spidertri]

They are not technically direct fit. If you have a drop you may need to roll the fenders. Stock E36 offset is around ET45.

[jae_rex]

Thanks for the info. I will let you know how it goes. I'm dropped on Racing Dynamics springs from Mavrix (1.2 back, 1.5 front) and the rubbers will be 205/50/16.