318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Suspension

Notices

Suspension Springs, sway bars, shocks.

.
» Recent Threads
1999 M-Sport For Sale
12-31-2023 05:10 PM
Last post by Coop540iT
03-23-2024 06:39 PM
1 Replies, 99,239 Views
Once again 318ti owner...
03-20-2024 12:39 PM
Last post by two30grain
03-22-2024 02:04 PM
1 Replies, 62,197 Views
What brakes do I...
03-20-2024 03:27 PM
Last post by huirtera
03-20-2024 03:27 PM
0 Replies, 59,464 Views
  Share/Bookmark
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-19-2019, 11:12 AM   #1
MisterM52
Senior Member
 
MisterM52's Avatar
 
Join Date: Jul 2017
Location: Stuttgart, Germany
Posts: 118
iTrader: (0)
Thumbs up DIY X-Brace & Support Tube Retrofit

My latest addon was fitting the regular Support Tube found often on E36 onto the Ti. And then I did a custom DIY Xbrace anyone here can do. I already had the older OEM Xbrace on my E36 coupe, so figured I do my own and it came out quite well for a few hours of my time.

I used 5mm thick spacers I had from my HMW projects, and needed about 25mm space on each side to fit the BMW OEM Support Tube, it usually bolts on to the 5 speed transmissions on those cars, it didnt in my case on the Ti without doing more retro fitting, so I figured I'd just leave it as it is to add more bracing up front.

For the Xbrace I used 20mm x 1.6mm thick square steel tubing, quite solid stuff. The X is made using some 3mm thick bars. Then all goes in together with Some M8 and M6 Bolts. I basically made 2 holes about 20mm apart from each side and installed nutserts on the factory OEM brace. Next two pieces of square tubing and a hole on each. Installed nutserts on the factory location.

After it was all done I took it for a drive and felt a lot more stiff and sturdy at higher speeds as well as the whole turn in. That was as it was, then I decided to add 2 more braces and had it welded by a friend to aid in rigidness.

May do a little grinding and put a coat of paint sometime this week and add more pictures. But overall all you need is some square tubing, some nutserts, bolts really. Will add more pictures in the coming days.
Attached Thumbnails
Click image for larger version Name:	IMG_20190518_182504.jpg Views:	166 Size:	77.5 KB ID:	17632   Click image for larger version Name:	IMG_20190517_192844.jpg Views:	150 Size:	62.1 KB ID:	17633   Click image for larger version Name:	IMG_20190517_191829.jpg Views:	143 Size:	67.0 KB ID:	17634  

Click image for larger version Name:	IMG_20190517_191647.jpg Views:	143 Size:	98.4 KB ID:	17635   Click image for larger version Name:	IMG_20190518_124222.jpg Views:	142 Size:	72.5 KB ID:	17636  

Last edited by MisterM52; 05-19-2019 at 11:14 AM.
MisterM52 is offline   Reply With Quote
 

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Play in steering: Lower joint Assembly DIY Bluebimma Knowledge Base 5 10-29-2016 01:43 AM
DIY: Bi-xenon retrofit into your stock plastic headlights! MINIz guy Exterior 2 01-03-2016 06:57 AM
Midnight Tuning Solutions OBD1 DIY BMW Live Tuning Kit bmwconnect Engine 61 10-11-2011 03:49 AM
parking distance sensors ipswich318ti Electrical 27 05-26-2008 05:47 PM
Pics of the Lumbar Support Retrofit Kit cali-ti Interior and ICE 3 05-07-2006 01:48 PM


All times are GMT +1. The time now is 09:58 PM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 93.15 k/101.84 k (8.54%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.