Water/Meth Injection Setups?

[minicoop900]

I've searched and found a few results here/there but we should probably make a sticky for this, mainly for the s/c guys.

what im looking for are:
Pics
parts/pieces used
mixture your running/how much boost you push
placement of tanks
placement/quantity of spray jets used

[xxxJohnBoyxxx]

I run a Snow system and I'm sure I have many pictures of it installed on my DASC (.150 Jet). I also have it installed on my current turbo (.350 Jet). I run a 150psi pump controlled by a Snow manual controller. Comes on at 20psi 10% and 90% by 29psi. On the DASC I ran the smaller jet and hit it with Meth from 12psi (20%) to 16psi (100%). I've run Meth at 100%, 51/49 mix and run 100% Meth with Nitro.

My farovite has always been 51(water)/49(Meth) injected at 12psi on DASC and anything over 20psi Turbo since my turbo is intercooler. I will look for pictures cause I know I have a lot of them and I have a hidden kit

[whitecord]

coolingmist has a very nice 2.5 gallon tank that intergrated the pump and contoller into it. cooling mist also has a sensor less system that watches the pumps pwm to detect loss of flow.

plus there is a ton of n54 guys runing them in the 135/335 and have very little problems.

[dguzzardo22]

That's the same kit I have . That hes looking to buy .