The Ti's that were at the 2008 Sunbelt Tech Seesion Pics (NO 56Ks)

[Phamster]

Here is a couple of more pic from the tech session:

http://forums.bimmerforums.com/forum...=918313&page=3

[mohaughn]

The wheels look like ASA AR1's to me. Just with a BMW center cap...

I think BMW does have a similar looking rim as well.


Any information on what kind of suspension he is running? I see it is a c-mod car, but it looks like he isn't running remote reservoirs on the suspension. Kind of hard to tell from the rear pics though. I'm guessing it is a mod car because of the engine swap. All of the swapped Ti's look good.

[StealthBimmer]

There are some nice looking bimmers! Ti is represented at the tech meet. Keep up the good work guys!

[AlaskaBlue]

Originally Posted by mohaughn

The wheels look like ASA AR1's to me. Just with a BMW center cap...

That is what they look like to me as well.

[Phamster]

Originally Posted by mohaughn

The wheels look like ASA AR1's to me. Just with a BMW center cap...

I think BMW does have a similar looking rim as well.


Any information on what kind of suspension he is running? I see it is a c-mod car, but it looks like he isn't running remote reservoirs on the suspension. Kind of hard to tell from the rear pics though. I'm guessing it is a mod car because of the engine swap. All of the swapped Ti's look good.

I'm not sure what brand the his suspension is but it's coil overs. That car is stiff! You try to press down the car and it doesn't move!

[mohaughn]

Originally Posted by Phamster

I'm not sure what brand the his suspension is but it's coil overs. That car is stiff! You try to press down the car and it doesn't move!

Yeah, I've seen the car before in pictures, and I'm pretty sure he was registered to be at the BMWCR race in Sebring, but I never saw his car out there. I've been wanting to see some interior shots of the car, to see how he did his rear cage. Mine will look very similar to that, but I think I'm going to bring the rear downtubes to the chassis, and it looks like his go to the wheel well..

If I had to guess on the suspension it is grountcontrol, or AST. The front camber plates look like vorshlag plates, and they sell AST coilovers. That front strut brace is a Mason engineering bar, which is also sold by vorshlag. Of course, it could be using TcKline coilovers as those are pretty common in BMW-CR. Definitely looks like a fun car.

[tiFreak]

lol, I love the intake on the second pic, that's so cool

[96cali]

whose white 328ti is that? Is it the iron or aluminum block?

[Phamster]

Originally Posted by 96cali

whose white 328ti is that? Is it the iron or aluminum block?

Aluminum, I think his sn on this form is Jede/Z or something.