318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Misc

Notices

Misc Does not fit in any of the forums below.

.
» Recent Threads
1999 M-Sport For Sale
12-31-2023 05:10 PM
Last post by Coop540iT
03-23-2024 06:39 PM
1 Replies, 95,680 Views
Once again 318ti owner...
03-20-2024 12:39 PM
Last post by two30grain
03-22-2024 02:04 PM
1 Replies, 58,618 Views
What brakes do I...
03-20-2024 03:27 PM
Last post by huirtera
03-20-2024 03:27 PM
0 Replies, 56,040 Views
M50+manual swap bastard...
03-01-2024 11:00 PM
Last post by Andy318
03-18-2024 02:34 PM
3 Replies, 130,941 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 03-05-2006, 02:31 AM   #1
318tiRedLeather
Senior Member
 
318tiRedLeather's Avatar
 
Join Date: Dec 2005
Location: Plano Texas
Posts: 206
iTrader: (0)
Default Air bag cover

I have the passenger air bag cover loose and since it is not really connected to any of the air bag components i was wondering if it would be safe to just put some velco on it or just glue it on some how. Im open to any other suggestion.

Thanks
__________________
K&N Cone Filter with Heat Shield, Racing Dynamics Strut bar, Blisten yellow sport suspension, Clears all around, Angel eyes, Dinan Engine Chip, Infinity BassLink 10" Sub, Lightweight Aluminum Flywheel
318tiRedLeather is offline   Reply With Quote
Old 03-06-2006, 03:29 AM   #2
318tiRedLeather
Senior Member
 
318tiRedLeather's Avatar
 
Join Date: Dec 2005
Location: Plano Texas
Posts: 206
iTrader: (0)
Default

BUMP
__________________
K&N Cone Filter with Heat Shield, Racing Dynamics Strut bar, Blisten yellow sport suspension, Clears all around, Angel eyes, Dinan Engine Chip, Infinity BassLink 10" Sub, Lightweight Aluminum Flywheel
318tiRedLeather is offline   Reply With Quote
Old 03-06-2006, 03:56 AM   #3
clex2
Senior Member
 
clex2's Avatar
 
Join Date: Nov 2003
Location: Walnut Creek, CA
Posts: 642
iTrader: (1)
Default

Redleather,

The passenger airbag cover is held in by 4 friction type clips on the underside. Over time, they seem to work themselves back out a bit. Pushing down from the top doesn't help. There's too much "cushion" in the cover to move the clips. What you can do is remove the glove box, whcih is not hard, and pull the clips from below. They move a miniscule amount, but enought to snug the cover back down. For whatever reason, all the airbag cover seem to do this. Both of my ti's had this and discovered that pulling from below is your best bet of making the cover sit flat.
__________________
'95 330ti CS w/sr delete, S50USB30, cams, 24# inj, Conforti SW, Euro HFM, Samco Silicone Intake Boot, BBTB, Euro Oil Cooler, JTD CAI Duct, RE DMS exhaust, RE Tranny mounts, CF Valve Cover, LTW flywheel/Kevlar sprung hub clutch, RE SSK, 3.46 Finned LSD (M6) , M3 tranny, Brembos, RE Wheel Studs, SS brake/clutch lines, CF interior, Rear Headrest retrofit, Tilt Steering retrofit, 13.5 lb DynaBatt in rear, LED interior/footwell lights, ZKW HID, Headlight Aim Control, Rear fog light w/cluster indicator, CF 3 Aux gauge pod, BMW Traffic Pro/Alpine MP3-CD Changer, Staggered LTW wheels, '95 M3 steering rack, VIS CF Hood, M3 LTW Strut Bar, TCK SA coilovers, Red LTW Motorsport Seatbelts, OEM Fire Extinguisher, Z8 Starter button, Auto dim rear view mirror w/ Homelink/Compass, PDC, Rear Sun Shade, Euro Gauge Cluster w/oil temp/shift light , Headlight Washers, "Motorsport" Door Handles, CF Grills, French ZKW Fogs, Euro dash bins, Power Lumbar Support is next, Coming e39 M5 interior light, Bimmer Magazine 8/2007
clex2 is offline   Reply With Quote
Old 03-07-2006, 06:25 AM   #4
318tiRedLeather
Senior Member
 
318tiRedLeather's Avatar
 
Join Date: Dec 2005
Location: Plano Texas
Posts: 206
iTrader: (0)
Default

The clips that hold the cover in place are broken. I was wondering what i could do to keep this from moving.
__________________
K&N Cone Filter with Heat Shield, Racing Dynamics Strut bar, Blisten yellow sport suspension, Clears all around, Angel eyes, Dinan Engine Chip, Infinity BassLink 10" Sub, Lightweight Aluminum Flywheel
318tiRedLeather is offline   Reply With Quote
Old 03-07-2006, 06:28 AM   #5
clex2
Senior Member
 
clex2's Avatar
 
Join Date: Nov 2003
Location: Walnut Creek, CA
Posts: 642
iTrader: (1)
Default

In that case, maybe you need to buy new clips? Or cover?

http://www.realoem.com/bmw/showparts...64&hg=51&fg=30
__________________
'95 330ti CS w/sr delete, S50USB30, cams, 24# inj, Conforti SW, Euro HFM, Samco Silicone Intake Boot, BBTB, Euro Oil Cooler, JTD CAI Duct, RE DMS exhaust, RE Tranny mounts, CF Valve Cover, LTW flywheel/Kevlar sprung hub clutch, RE SSK, 3.46 Finned LSD (M6) , M3 tranny, Brembos, RE Wheel Studs, SS brake/clutch lines, CF interior, Rear Headrest retrofit, Tilt Steering retrofit, 13.5 lb DynaBatt in rear, LED interior/footwell lights, ZKW HID, Headlight Aim Control, Rear fog light w/cluster indicator, CF 3 Aux gauge pod, BMW Traffic Pro/Alpine MP3-CD Changer, Staggered LTW wheels, '95 M3 steering rack, VIS CF Hood, M3 LTW Strut Bar, TCK SA coilovers, Red LTW Motorsport Seatbelts, OEM Fire Extinguisher, Z8 Starter button, Auto dim rear view mirror w/ Homelink/Compass, PDC, Rear Sun Shade, Euro Gauge Cluster w/oil temp/shift light , Headlight Washers, "Motorsport" Door Handles, CF Grills, French ZKW Fogs, Euro dash bins, Power Lumbar Support is next, Coming e39 M5 interior light, Bimmer Magazine 8/2007
clex2 is offline   Reply With Quote
Old 03-07-2006, 06:29 AM   #6
318tiRedLeather
Senior Member
 
318tiRedLeather's Avatar
 
Join Date: Dec 2005
Location: Plano Texas
Posts: 206
iTrader: (0)
Default

would just using some double sided tape or something to hold it in place not be safe?
__________________
K&N Cone Filter with Heat Shield, Racing Dynamics Strut bar, Blisten yellow sport suspension, Clears all around, Angel eyes, Dinan Engine Chip, Infinity BassLink 10" Sub, Lightweight Aluminum Flywheel
318tiRedLeather is offline   Reply With Quote
Old 03-07-2006, 06:31 AM   #7
cali-ti
aka Stabby
 
cali-ti's Avatar
 
Join Date: Nov 2004
Location: Mead, CO
Posts: 5,336
iTrader: (0)
Default

for like 50 cents or less apiece, i think i'd get the clips.
__________________
1996 318ti, California package, 267k miles
current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray

acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts




2002 X5 4.4 Sport Package, 53.5k miles
Current Mods: e46 m3 steering wheel
cali-ti is offline   Reply With Quote
Old 03-07-2006, 06:34 AM   #8
clex2
Senior Member
 
clex2's Avatar
 
Join Date: Nov 2003
Location: Walnut Creek, CA
Posts: 642
iTrader: (1)
Default

Double sided tape may work, but I doubt it will take the pounding the sun may dish out. Double sided tape should give way when the bag blows, but I don't think it has the strength to hold the panel down completely flat if it is warped. Just don't epoxy the panel on. If you are just looking to hold it inplace, I say try the doulble sided tape. Otherwise, I would get the parts necessary to fix it right.
__________________
'95 330ti CS w/sr delete, S50USB30, cams, 24# inj, Conforti SW, Euro HFM, Samco Silicone Intake Boot, BBTB, Euro Oil Cooler, JTD CAI Duct, RE DMS exhaust, RE Tranny mounts, CF Valve Cover, LTW flywheel/Kevlar sprung hub clutch, RE SSK, 3.46 Finned LSD (M6) , M3 tranny, Brembos, RE Wheel Studs, SS brake/clutch lines, CF interior, Rear Headrest retrofit, Tilt Steering retrofit, 13.5 lb DynaBatt in rear, LED interior/footwell lights, ZKW HID, Headlight Aim Control, Rear fog light w/cluster indicator, CF 3 Aux gauge pod, BMW Traffic Pro/Alpine MP3-CD Changer, Staggered LTW wheels, '95 M3 steering rack, VIS CF Hood, M3 LTW Strut Bar, TCK SA coilovers, Red LTW Motorsport Seatbelts, OEM Fire Extinguisher, Z8 Starter button, Auto dim rear view mirror w/ Homelink/Compass, PDC, Rear Sun Shade, Euro Gauge Cluster w/oil temp/shift light , Headlight Washers, "Motorsport" Door Handles, CF Grills, French ZKW Fogs, Euro dash bins, Power Lumbar Support is next, Coming e39 M5 interior light, Bimmer Magazine 8/2007
clex2 is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Totalled '97 318ti Sport Turtlefan US and North America 16 09-29-2007 07:36 AM
Totalled my Ti Will'sBimmer General Chit Chat 11 11-11-2006 12:08 AM
totalled the Reis_Jager yesterday in the rain. Panzer_M Lounge 39 05-18-2005 04:49 PM
98 318ti FL (totalled) jbreiding US and North America 0 04-09-2005 08:16 PM
Totalled my ti last night... durnadupa General Chit Chat 18 02-03-2005 07:57 PM


All times are GMT +1. The time now is 10:35 AM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 89.63 k/105.43 k (14.99%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.