Small problem with rear window defroster (96, 318ti).
Fuse is okay, getting power, button to turn rear defroster on at center console OK, no shorts in the wiring,
...just that the wire (3 female pinned termination/connector) isn't connected to anything....
The solder points attached to the window are in tact.
See pics below.
http://www.markkuarimo.com/IMG_0360.JPG http://www.markkuarimo.com/IMG_0362.JPG http://www.markkuarimo.com/IMG_0363.JPG http://www.markkuarimo.com/IMG_0364.JPG pics 0363, is the left side and 0364 the right side, I have no idea what those are.
Looks like there might be something missing entirely...there is no male end to plug in the female end showen 0360.
I have a block diagram for the entire circuit from start to finnish just it's not connected and can't see where it should connect to...
Any help is much appreciated.