M-Tech door molding

romanescobar · 06-02-2008, 01:02 AM

I want to buy the M-Tech door molding for my ti, but I don't know where to get them. I have seen M3 two door kits being sold, but does anyone know if they fit??? or is the body different???

CirrusSR22 · 06-02-2008, 01:19 AM

Here's the realoem.com diagram with the part number for the entire kit. Part # 51132267003. http://tischerbmw.net/ Is the best price I can find right now. $163.20 for the kit.

http://www.realoem.com/bmw/showparts...88&hg=51&fg=95

I think the 318ti parts for the most part are unique, so a 2 door kit will not fit. Someone correct me if I'm wrong

thesk8nmidget · 06-02-2008, 02:23 PM

the moldings are the same for 2 doors and ti's

elchicano · 06-02-2008, 03:39 PM

Quote:

Originally Posted by thesk8nmidget

the moldings are the same for 2 doors and ti's

The door moldings will be the same as a 2 door. But the other moldings wont fit the ti. Believe me i have the 2 door moldings in my closet.

thesk8nmidget · 06-02-2008, 03:45 PM

oh then nevermind! my bad! thats lame!

tiFreak · 06-02-2008, 11:18 PM

I assume the fender moldings would be the sedan ones, and the quarter would be ti-specific, why the hell couldn't BMW make it easy?

thesk8nmidget · 06-02-2008, 11:21 PM

they will make more money

naustin · 06-03-2008, 04:13 PM

Ah the price to pay to have a unique car. I love it.

thesk8nmidget · 06-03-2008, 04:26 PM

^agreed!

i like being unique and different!

SDKmann · 06-03-2008, 05:47 PM

Well as long as you can find someone to sell you the front door and fender moldings from a sedan you can keep the price down by only having to buy the quarter panel moldings. Do all sport models come with these moldings? I was looking at a 97 Sport a while ago and it had these moldings and Im 98% sure that the PO didnt put them on.

thesk8nmidget · 06-03-2008, 06:11 PM

yes all sports besides 95's

ruben89 · 06-09-2010, 06:18 AM

I just looked up the door moldings on the DDM website and it says that it will fit the 318ti (96-98)....Im just wondering if they give you specific ones or they just assume that they will fit...?

spidertri · 06-09-2010, 06:31 AM

Quote:

We do not currently offer these moldings for BMW E36 ti, OEM only.

That's on DDMs page. The thing at the bottom is wrong.

Mr. Crow · 06-09-2010, 09:15 AM

Bavauto I know sells the entire kit for the ti, if tischer doesnt have them. Thats a great price for brand new techies!

Bavauto charges around 190$. Finding a used kit in good cond is hard to find. some may have rust or been tweeked from pulling them off.

If your a perfectionist, used ones will not mount tight! FYI......

And confirmed, fronts=sedan......doors=coupe? I dont think so, sedans may fit. Rear's are def ti/compact specific.

M-tech ti mouldings have different part#'s from every other e36.

Good Luck!

ruben89 · 06-10-2010, 04:26 PM

Thanks that's what i wanted to know....

I took a tape measure to the fender moldings off a 97 4door M3 and and my stock ti, and they look like they will fit, they are both 8 1/2 inches long.

I hope this will help....

.	Powered by site supporters vBulletin Version 3.8.8 Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Copyright ©1999 - 2024, 318ti.org © vBadvanced CMPS v3.2.2 [page compression: 111.07 k/134.29 k (17.29%)]
318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.