I hope the heated seat pads work. To be honest replacing them is the biggest pain in doing a retrofit. My car was wired for heated seats when I swapped in Vaders, had to replace the heater pads in the driver's seat, and the leather looked like sh!t when I swapped it in.
I had to replace the entire foam insert and have it professionally done to look decent. As long as the heaters are fine, the wiring shouldn't be hard.
Nothing close to retrofitting OBC or Cruise Control. I added lumbar support to my seats, should be similar in application.
Quote:
Originally Posted by romanescobar  Just found a really nice pair of black manual heated seats out of a wrecked my in a salvage yard for $500. They are also heated. My Ti isn't wired for heated seats...the guy pulling the seats told me that if I did the research he would pull whatever I needed out of the wrecked M3 to make the heated seats work. Someone please help...I know I would need the wiring harness from the seat to the switch to the fuse box. Does anyone know if there are any relays or anything else I should have him pull. I am picking them up on friday so any fast info would really really help and be appreciated. |
Heated Seats Help!!! 
Linear Mode
