M44 DME info here (maps, motronic editor, ...)

[nuvolarossa]

Hi, after months and months of research I think that I'm on the right way. I've used MTH CarTune for download my ECU flash file and now I'm at this level of knowledge:

-IGNITION MAPS:
PART THROTTLE MAP [2 maps at 2 different address] [16x12]:

LAMBDA MAP (i don't know what the real name..help) [14x12]:


-ADVANCE MAPS:
IDLE MAP [8x3]:

PART THROTTLE MAP [4 maps at 4 different address] [16x12]:

FULL LOAD MAP [16x4]:


I know map addresses of these maps, I need only the rev-limiter address.

I was writing a spec file for Motronic editor(http://www.atlllc.com/atlantis.php?p...onic%20Editor) for make thigs easier, but I can't find it now.
This is Motronic editor, for who don't know it:


Do you like this project?
I can't do all on my own, I need help on some things from someone who know ECUs...
Maybe this can be a way to custom tune for custom mods, without going piggyback...
bye

[gimp]

I know this is an old thread, but what is the status? I'd love to be able to hear your progress.