Anti Slip Control and Traction Control ASC+T

[davebird61]

I have a 318TI Australian model ( 1998 )
The ASC light started coming on just after the car was started and taking off. At the time the light came on the engine missfired.

I plugged in the Peake Diagnostic Tool and it had the Throttle Position Sensor, Load Calculation Crosscheck Error and the Missfire.

I unplugged the sensor on the diff for the traction control and checked the wiring all OK. I then removed the ASC relay and the 3 fuses for the ASC and ABS. Now the ASC & ABS lights are on permanent on the dash.

The missfire is still there but the throttle position sensor has gone away but the MAF has come on permanent.

Q1- How can I clear the ASC & ABS lights on the dash?
Q2- Can I run without the MAF & if so how do I dissable it?
Q3- How can I dissable the ASC+T?
Q4- The manual states with the ASC+T there is extra Throttle Actuator, where is it?