s52 timing.. im stumped hey all, i redid vanos. i had to remove the locking blocks that i had originally installed because it was preventing me from removing vanos..and well when i went to take the vanos off i turned the sprocket and the intake cam turned... the exhaust did not.. i had the flywheel lock pin installed, so i reinstalled everything and checked it, the exhaust cam is TDC and the locking block sits fine.. the intake is not.. this is where im stumped.. how can i re set the timing for intake? ive looked all over, do i just get a 24mm wrench and turn the intake cam? thanks. |