What did you do to your car today?

[tiFreak]

finally installed my Depo headlights. had to temporarily convert my Dinan intake into a short ram until I can get a filter small enough to fit and I had to relocate my alarm siren inside the bumper. also whatever the body shop used to install my eyelids was pretty strong stuff, I had to buy new corner lights because I couldn't get all the adhesive off

angel eyes haven't been wired in yet but I can probably do that tomorrow after work

[bullmand]

Last weekend I replaced the oil filter housing gasket and "bush". Then I had to wait a week for the new tensioner to replace the one I broke while taking it off. It's all back together now and doing just fine.

[tiFreak]

wired up my angel eyes. I wired them into the unused spot for fuse 45 so they're always on with the ignition. of course one of my stealth bulbs in my turn signal burned out shortly after so now I'm rocking an egg yolk until I can get new ones

[Borg561]

New side molding badges. After the accident last year, the repair shop had put an M3 badge on the driver's side. Not sure why. Finally got around to replacing it. Car wash is next on the list (tomorrow I think).


Justin

[teetime4one]

Originally Posted by Borg561

New side molding badges. After the accident last year, the repair shop had put an M3 badge on the driver's side. Not sure why. Finally got around to replacing it. Car wash is next on the list (tomorrow I think).


Justin

SWEET

[Borg561]

Still think I'm going to order the Motorsport International badges as well, but since they have a lot of white in them I don't think they'll look as good on a black car. BTW, if anyone is interested in these, the part number is 51-13-2-251-378. In the US, it's a special order item and took about a month to get. Looks like Tischer ordered 3 and I got two of them.

Justin

[J!m]

Emblem “BMW Individual” (metal) 36.13.7.897.226
Badge – “ti” 51.14.8.170.183
Badge – “M” 51.14.2.250.811
Badge – “M” (Small) 51.14.2.492.942
Side emblem “Motorspt. Internat’l” 51.13.2.264.146
Side Emblem "M" 51.13.2.264.666
Side Emblem “BMW M Technic” 51.13.2.251.378
Sticker, “M Technic” (small) 51.11.1.919.154
Sticker, “M Technic” (large) 51.12.1.919.155

E36 M3 CSL Radio delete plate 65.11.1.384.855
Ti radio antenna hole plug 51.71.1.855.009
(haven't tried it yet, but looks like the right one now that I have it in hand)
ti antenna grommet 65.21.8.362.369
(keep the water out of your trunk!)

E36 M3 CSL Door sill plates 51.47.2.268.574
Euro M3GT 3-spoke steering wheel 32.34.1.093.354

Exhaust tip - chrome (for ti muffler) 82.12.9.404.501
Exhaust tip - black (for ti muffler) 82.12.9.404.502

Under hood light kit 63.31.9.401.943
Wiring harness for above kit 61.12.9.401.873

BMW “M” Umbrella 80.23.0.439.654
_or_ 80.23.0.408.573

Tow Rope 82.12.9.406.650
Hatch compartment cargo net 82.11.9.407.000
Hatch compartment rubber floor mat 82.26.9.402.851
Rear cargo area lashing straps 82.26.9.407.617
Rear sun shade 82.24.9.402.930

Lumbar support retro-kit (both sides) 52.10.9.404.379
(not sure which seats but I think the sport seats)

Left Mirror Speaker w/ “M” Logo 51.32.2.267.117
Right Mirror Speaker w/ “M” Logo 51.32.2.267.118
(I don't know if these fit the 'sedan' style of the ti and there is obviously no wiring present for them)

All above taken from the engine swap manual I offer...

[teetime4one]

Replaced front sway bar bushings and caps (Powerflex Polyurethane), Sway bar end links (OEM) and installed a Racing Dynamics strut bar.
The car is much tighter now.

[black98]

Nice job Sean

Have pics of the strut bar

[teetime4one]

Originally Posted by black98

Nice job Sean

Have pics of the strut bar

[black98]

Oh so pretty, Mine goes the other way i wonder if it makes any difference

[teetime4one]

Don't know the answer to that.
Because Race Car?
lol

[black98]

LOL

[03whitegsr]

Carbon sunroof plug

[teetime4one]

^ dope!