I was asked by a member today if I could take a few pictures of the wires that are in the drivers door mirror adjust switch. I figured it would be best documented for others to utilize.
Note: If you open the lid on the case it is best to be careful. These wires will fall out.
On the back of the switch you will find the location of each wire is numbered 1 thru 6.
Here is the order in which they're in.
#1 black w/thin white stripe
#2 brown
#3 baby blue w/white stripe
#4 green w/white stripe
#5 white w/thin black stripe
#6 blue w/black stripe