Anybody want a cruise control actuator? Right now I have the unit that mounts up behind the driver side headlights and the mounting bracket that holds it down.
The bowden cable is attached but the rubber grommet that holds the cable into the throttle body fell apart when I pushed it out. So you will probably need a new bowden cable. It is about 20$ at the dealer.
http://www.realoem.com/bmw/showparts...52&hg=66&fg=20 So 3, 4, and 7 is what I believe is all in one piece. I also have 8 and 9, the plastic piece that holds the cable to the throttle plate and the little metal clip that holds the bowden cable onto the strut tower. $40 shipped.
I'll take a picture and post part numbers when I get home. I wasn't sure which unit was the cruise control unit so once I've checked my bentleys and make sure I'm removing the right unit I will also have the cruise control unit. I need to look at how the stalk mounts to the steering column to see if I want to remove that.
The control unit will probably be 75$.
Cruise Control actuator and control unit 
Threaded Mode