» Site Navigation | | » Recent Threads | | | | | | 03-22-2007, 04:07 PM | #1 | Junior Member Join Date: Feb 2007 Location: Mass. Posts: 6 | OBX helical/torsen diff??? anyone have it? http://cgi.ebay.com/ebaymotors/OBX-H...em170092718399 would rather have a quaife, but it seems you need a gb to get one now which would be a pita... | | | 03-22-2007, 08:18 PM | #2 | Senior Member Join Date: Jan 2006 Location: Greece Athens Posts: 302 | Guys is this LSD unit suitable for our diifs? i have the standard small case diff, same with 318ti. I would be really interested in that price range! Does anyone know that company? What is your opinion? __________________ Alpina front lip spoiler,ACS roof spoiler,OEM clear rear-side lights,In-Pro blackchrome front indicators,Lummar tinted glasses,318ti.org decalls,Eibach Sportline 45mm/30mm springs,Bilstein Sprint shocks,16mm rear sway bar,front eccentric wishbone bushes,E46 conv. RSMs,5mm rear lower spring seats,OMP alloy strut brace front,racing24 carbon/alloy strutbrace rear,x brace,K&N panel filter,L&W back box 2x84mm,BBS RK 8x17,Fulda Carat Exelero 225-45-17Y,Brembo drilled front rotors | | | 03-23-2007, 05:50 AM | #3 | Senior Member Join Date: Mar 2005 Location: Portland Or Posts: 2,666 | I suspect its a custom Detroit true-trak. Similar design to a Quaife, or Thorsen/Gleason unit. Not bad units. Most rear ends use the same guts with different ring and pinion sets. So if its designed for a small case housing should fit. Buy a open diff in the ratio you like and have a shop swap the carrier from open to the LSD. Tip, find a shop that does a lot of axle gear work, either race or 4 wheel drive or rally shop... Dave __________________ Dave - PDX 1995 318ti - Active Black and Tan. 2005 330xi - Mtech 1 - 6spd - Orient Blue/Black | | | 03-23-2007, 07:06 AM | #4 | Senior Member Join Date: Feb 2004 Location: Port St. Johns, Florida Posts: 2,242 | You are bidding on an OBX Racing Sports Helical Limited Slip Differential for the BMW 325i (E30, E36), 525-535i (E28, E34), 633-635csi, 735i. (Part #N/A). Brand new and still sealed in box. Also comes with a lifetime warranty from manufacturer defects. Why pay more elsewhere when you can buy it now for $395 sounds like it works with a 188mm case, I don't know if it can go into a 168mm small diff. | | | 03-23-2007, 03:48 PM | #5 | Junior Member Join Date: Feb 2007 Location: Mass. Posts: 6 | Do you guys know of any other diff options? I really don't want a VLSD so that means OE bmw LSDs are all out. I'd like a helical or torsen because they offer the handling I want, but a 1 or 1.5way clutch type would be alright too. Seems like it's near impossible to find some performance parts for the 318ti other than DASC and lowering springs :-/. I love the car, but my options are limited if I buy one... | | | 03-23-2007, 06:01 PM | #6 | Senior Member Join Date: Aug 2005 Location: Florida Posts: 2,525 | I'm sure diffsonline.com can build whatever you want for the right price. | | | 03-24-2007, 08:14 PM | #7 | Senior Member Join Date: Jan 2006 Location: Greece Athens Posts: 302 | Guys, would yo trust that diff? I am really interested, and i want your opinions. What do you think about the price? __________________ Alpina front lip spoiler,ACS roof spoiler,OEM clear rear-side lights,In-Pro blackchrome front indicators,Lummar tinted glasses,318ti.org decalls,Eibach Sportline 45mm/30mm springs,Bilstein Sprint shocks,16mm rear sway bar,front eccentric wishbone bushes,E46 conv. RSMs,5mm rear lower spring seats,OMP alloy strut brace front,racing24 carbon/alloy strutbrace rear,x brace,K&N panel filter,L&W back box 2x84mm,BBS RK 8x17,Fulda Carat Exelero 225-45-17Y,Brembo drilled front rotors | | | 03-25-2007, 01:07 AM | #8 | Senior Member Join Date: Mar 2005 Location: Portland Or Posts: 2,666 | The price is on par with the true-trak I had in my jeep. $395US for the unit and a good rear end shop should install it for the price of the shim/seal kit + a couple hours labor. Dave __________________ Dave - PDX 1995 318ti - Active Black and Tan. 2005 330xi - Mtech 1 - 6spd - Orient Blue/Black | | | 03-26-2007, 04:35 PM | #9 | Senior Member Join Date: Jan 2006 Location: Greece Athens Posts: 302 | Does anybody know the locking percentage of this unit? __________________ Alpina front lip spoiler,ACS roof spoiler,OEM clear rear-side lights,In-Pro blackchrome front indicators,Lummar tinted glasses,318ti.org decalls,Eibach Sportline 45mm/30mm springs,Bilstein Sprint shocks,16mm rear sway bar,front eccentric wishbone bushes,E46 conv. RSMs,5mm rear lower spring seats,OMP alloy strut brace front,racing24 carbon/alloy strutbrace rear,x brace,K&N panel filter,L&W back box 2x84mm,BBS RK 8x17,Fulda Carat Exelero 225-45-17Y,Brembo drilled front rotors | | | | Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | Posting Rules | You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |