OBD 2 S52 INTO 95 Clubsport I am in the middle of swapping a full 97 S52 setup with OBD2 into my 95 clusport ti. Again I will be keeping the OBD2 set up. I have the complete 97 M3 and all the parts i need. I cannot seem to find anyone on here that has retained the OBD2 into an OBD1 318ti. I have seen plenty of E30 though. If anyone could point me in the right direction for that it would be great. Looking for wiring info. I can figure out myself but any tips would be helpful. Current set up is 97 M3 engine and trans, with M50 manifold swap kit,jbe lightweight flywheel and M5 clutch, upgraded engine mounts and trans mounts, long tube headers, TRM will be doing the ECU flash. The ti has M3 style Koni suspension, H&R springs, stainless brake and clutch lines, M3 sways front and rear, M3 spindles and E46 brakes in the front. Been slowly working on this for a year now. I finally got everything I need. Ill get more pics up tomorrow. |