318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Engine

Notices

Engine Tuneups, chips, wires, spark plugs.

.
» Recent Threads
The 318ti OBD-II engine...
10-19-2006 06:48 PM
Last post by Filiski120
04-24-2024 06:40 PM
210 Replies, 988,723 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 02-23-2014, 10:13 PM   #1
SpeedDemon
Member
 
SpeedDemon's Avatar
 
Join Date: Mar 2013
Location: richmond tx ( MARS)
Posts: 94
iTrader: (0)
Default m42 not holding idle

So the problem is I have a Idle Surge while driving and the car will not hold idle.IT will actually die. I thought it might be a dirty ICV so I cleaned it. The car ran fine for two day. And then I was driving home from work and half way home it start up all over again. Any ideas on whats going on.. Thanks for your time.
SpeedDemon is offline   Reply With Quote
Old 02-23-2014, 11:34 PM   #2
1996 328ti
Senior Member
 
1996 328ti's Avatar
 
Join Date: Jun 2003
Location: Greenville, SC
Posts: 9,356
Vehicles
iTrader: (1)
Default

I had that surge once or twice so far.

Cracked intake boot?
Cracked hoses?

I found 3 hoses going to the fuel injectors cracked.
__________________
...steven
BMW CCA #146825
1996 BMW 328ti • 2003 MINI Cooper S • 2016 M235i
www.bmwcca.org
1996 328ti is offline   Reply With Quote
Old 02-24-2014, 06:46 PM   #3
SpeedDemon
Member
 
SpeedDemon's Avatar
 
Join Date: Mar 2013
Location: richmond tx ( MARS)
Posts: 94
iTrader: (0)
Default

I check the boot. I will have to check the injectors.

Sent from my SCH-I545 using Tapatalk 2
SpeedDemon is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
YOUR M44 Idle Control Valve Eric Engine 18 02-10-2014 04:20 PM
High Perf M42 Parts, custom crank, etc. rob_e30 Parting out & Parts (US) 6 05-12-2012 07:16 PM
OH M47 Crank, M42 head, M42 HG Set, 2.1L Build part out joe318is US and North America 11 08-17-2010 03:32 AM
Engine is reving itself at times and holding high idle?? bmwtinut Maintenance 7 09-15-2009 02:32 AM
m42 idle surges bucksworld Engine 46 01-05-2007 04:07 AM


All times are GMT +1. The time now is 02:09 PM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 66.04 k/76.80 k (14.00%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.