Misc parts Custom built, Ground Control Street/Track coilovers, brand new

[raamaudio]

Custom built for my 318ti by Ground Control, Coilovers, SA, street and track with Hybrid GC camber plates, monoball rear shocks and mounts, 500lb F, 700lb R spring rates, they can be changed a bit to fit your particular needs

And also will fit any lowered by 1" or more E36, with a slight mod any height E36




Hybrid street/race camber plates.




Rears with height adjusters.




Rears upper monoball mounts




Rear lower monoball mounts.




Setup for the very serious street/track car build.

Never installed except one front was bolted to a knuckle while off the car to verify clearance before ordering new wheels.

List price for parts was $2664, package price is always less but even better you can have these for just $1799 shipped in Cont US, can ship elsewhere for added cost.

PayPal preferred, my ID is ram@raamaudio.com, verified account, confirmed shipping address required

I ship can asap, FedEx Ground, insured, signature required for delivery, other options are available.

Thanks,
Rick
801-452-5858

[raamaudio]

STILL available

These are a bad arse set of coilovers can can be changed a bit to server your specific needs since still brand new.

If not sold soon I have talked to CG and we are pretty sure I can adapt these, with some serious effort, to the new project car which I will do if not sold, very soon!

Thanks
Rick

[raamaudio]

Still available?

This is a superb set of custom build coilvers and can be changed to fit your needs

Thanks
Rick

[sprnova]

Originally Posted by raamaudio

Still available?

This is a superb set of custom build coilvers and can be changed to fit your needs

Thanks
Rick

You indicated different spring rates were possible. For street, I think a lower spring rate is necessary for the rear. Is that correct? I may be interested if getting a softer spring rate is possible. Thanks

[raamaudio]

I went with the rates chosen, by myself and GC working together on it, due to being better on track and most of the time on the street hauling 200lbs of dogs and supplies for site seeing, getting the groceries, etc....

I have to check with GC to see how low the rate can go with the current shock valving, worst case is having to send them back to get revalved but that does not cost to much.

If they do not sell very soon, like in the next few days, I am going to take them apart and start modifying them to fit the Fiesta ST, GC is willing to help me do that which is very cool of them.

These are better than anything I can buy for the ST right now so it would be worth the work but others are coming along though a lot more money than it would cost me to use these.

If you are quite serious let me know just how much so and I will get with GC right away

Thanks!
Rick

[raamaudio]

I just got off the phone with GC, the fronts are perfect, rear springs can go to 500 but they recommended 550 at the lowest and 600 as a good rate. The valving does not have to be changed so just a spring change in the rear and good to go

I am not lowering the price much at all, been offered to low, I will just have to make them fit the FiST if not sold very soon.

Sincerely
Rick

[raamaudio]

SOLD, shipping out today