widebody z3 trailing arms

[davidwattdjw]

I have a chance to get a cheap rear setup from a facelifted 1.9 z3 (if memory serves well the face lifts were all widebody) so this would mean I'd be able to get lengthened small case diff driveshaft's along with the wider stance.just wondered if anyone has done this or knows if this would even work?
Thanks

Also, another thing to make me think it is widebody is the bracing in the trailing arms

[Toolmaker]

Bolts right in if you are talking about the MZ3 stuff

[davidwattdjw]

Originally Posted by Toolmaker

Bolts right in if you are talking about the MZ3 stuff

Don't think this would be Z3M stuff as it's off of a facelift 1.8/1.9 8v Z3. Only thing that makes me wonder is the extra brace across the trailing arm. Might aswell just go for it as it would have the shafts to fit into my small case diff as the widebody ones would be slightly longer i would imagine, but luckily this is a small case diff in the z3!