upgrading 330 brakes?

[aznlonewolf135]

I am way overdue to get brakes...and this is what I am going to get. Please let me know if I did my homework right

for caliper
http://www.zionsvilleautosport.com/s...ory_Code=BBE46

for rotor and pads

http://store.r1concepts.com/Items/It...Brake%20Rotors

You guys have always been very helpful Thanks in advanced...

[thesk8nmidget]

i would stray away from drilled brakes

[Watchmyradical]

i would go with slotted UUC rotors from understeer.com

[DueceMcCracken]

I have r1concepts drilled/slotted rotors all way round with their brake pads. They havn't warped yet. Look good. Stop pretty well, I need to flush my brake fluid and bleed to really know. I would spend the money on better stuff though. I don't really trust them too much, but they havn't let me down. Tough call, if your on a budget then they are ok.

[rikdee]

[QUOTE=aznlonewolf135;176598]I am way overdue to get brakes...and this is what I am going to get. Please let me know if I did my homework right

You'll want to be sure that adding such large, additional stopping power in the front doesn't acually degrade overall brake performance by upsetting the brake bias of the car. If you're not planning to upgrade the rears, you should definitely inquire about possible implications to overall system bias.

[Mallard]

great you have chosen a 330i disc of 315mm

but a caliper set of 300 mm

you´d be one unhappy camper when they came home fella

[BimmerBum]

Originally Posted by Watchmyradical

i would go with slotted UUC rotors from understeer.com

Those are the same (or were and I would bet still are) as Brembo slotted.

[aznlonewolf135]

so did I at least pick right calipers?

[aznlonewolf135]

and how did you know the spec's on the rotors...I've looked and can't seem to find them...

[ATF]

Originally Posted by aznlonewolf135

and how did you know the spec's on the rotors...I've looked and can't seem to find them...

Theyre for 01+ E46's. Thus bigger size, the 99-00 E46's are smaller.