» Site Navigation | | » Recent Threads | | | | | | 05-24-2013, 07:01 AM | #1 | Member Join Date: Dec 2012 Location: Nagoya, Japan Posts: 39 | Can I use this for turbo oil feed? | | | 05-26-2013, 04:40 AM | #2 | Senior Member Join Date: Dec 2007 Location: Gulfport, Florida Posts: 3,208 | Use what? The rubber vacuum hose no way. You need a good quality stainless line with no areas that will rub a hole in it. The oil pressure from the tap on the oil filter will run as high as 50psi on cold starts. If you do blow the oil feed line to the turbo you will kill the turbo and the motor will dump all it's oil in less then 1 minute. So don't go cheep on that turbo oil feed line | | | 05-26-2013, 05:20 AM | #3 | Member Join Date: Dec 2012 Location: Nagoya, Japan Posts: 39 | I'm taking about the oil filter housing top! | | | 05-26-2013, 04:01 PM | #4 | Senior Member Join Date: Mar 2010 Location: Ottawa Posts: 579 | If your talking about the oil filter housing top then yes you sure can. I did it successfully without issue however it will be unfiltered oil reaching the turbo | | | 05-26-2013, 11:39 PM | #5 | Member Join Date: Dec 2012 Location: Nagoya, Japan Posts: 39 | No problem. I'm thinking of running an alloy inline filter in the actual oil feed line. Thanks for your input! | | | | Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | Posting Rules | You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |
All times are GMT +1. The time now is 04:21 PM.