» Site Navigation | | » Recent Threads | | | | | | 07-07-2006, 12:09 AM | #1 | Member Join Date: Apr 2006 Location: Oklahoma City, OK Posts: 45 | Part number identity? There are 4 hoses next to the ICV on my Ti that are cracked and need to be replaced. I found this out while replacing the 2 ICV hoses but in order to run the car I didn't touch the cracked ones and later on I looked in EPC- parts catalog but it was confusing and I was unable to find them in that software. I'll appreciate a little help from y'all. On the picture are visible only 3 of the hoses but actually they are 4. Thanks. '95 318ti Auto m42 | | | 07-07-2006, 12:24 AM | #2 | Senior Member Join Date: Jan 2004 Location: Northern Michigan Posts: 867 | Those run to the injectors. All four come in one branch- or one part. dam- my invoice is down state. I had this (and the other hoses) ordered, but never used it, so I returned it. I'm digging around realoem but can find anything. Find fuel injectors, and this should be near. Dealer can order it. josh __________________ [SIGPIC][/SIGPIC] | | | 07-08-2006, 02:18 PM | #3 | Member Join Date: Apr 2006 Location: Oklahoma City, OK Posts: 45 | thanx Josh, As you said, I looked for those hoses in fuel injection but it's confising man and i'm not sure. I guess you are the only one in this entire forun that knows something about that and is willing to help. Thanks again | | | 07-08-2006, 02:39 PM | #4 | aka Stabby Join Date: Nov 2004 Location: Mead, CO Posts: 5,336 | __________________ 1996 318ti, California package, 267k miles current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts 2002 X5 4.4 Sport Package, 53.5k miles Current Mods: e46 m3 steering wheel | | | 07-08-2006, 02:44 PM | #5 | Senior Member Join Date: Jan 2004 Location: Northern Michigan Posts: 867 | no problem- I'm down state for the weekend (she wants me back). I have the invoice here, but nothing on it matches! I KNOW I Had his part. I'd call the dealer in ann arbor, but it's saturday- they'll have it on stock (my return). Wierd this has my other hoses and M3 buper parts, but nothing for the part in question. Sorry man- monday I'll find out for you. I may have it delivered/ shipped up north. josh __________________ [SIGPIC][/SIGPIC] | | | 07-08-2006, 02:46 PM | #6 | Senior Member Join Date: Jan 2004 Location: Northern Michigan Posts: 867 | I think you've got it Cali! __________________ [SIGPIC][/SIGPIC] | | | 07-08-2006, 03:11 PM | #7 | Member Join Date: Apr 2006 Location: Oklahoma City, OK Posts: 45 | caliTI, thanks man, but the p/n you've given me is for the distribution piece and what I need are the hoses (p/n), not that piece man. | | | 07-08-2006, 03:53 PM | #8 | aka Stabby Join Date: Nov 2004 Location: Mead, CO Posts: 5,336 | they don't show a pic of the distribution piece and it's linked to both diagrams that would possibly have this 4-hose piece so i'm thinking that's what they call it. could be wrong, but i guess you'll have to find out directly from a dealer then as there's no direct pic of it. __________________ 1996 318ti, California package, 267k miles current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts 2002 X5 4.4 Sport Package, 53.5k miles Current Mods: e46 m3 steering wheel | | | 07-08-2006, 04:18 PM | #9 | Senior Member Join Date: Jan 2004 Location: Northern Michigan Posts: 867 | I pretty sure it's it, the $ is about right. It is basically the black plastic splitter which splices into 4 outlets, with 4 small hoses attached. josh __________________ [SIGPIC][/SIGPIC] | | | 07-08-2006, 08:29 PM | #10 | Senior Member Join Date: Apr 2005 Location: San Francisco Posts: 308 | __________________ '99 ti /Mtechnic, Schwartz II, Meyle Control Arms w/Full Metal Ball Joints, PowerFlex poly LCAB's, Pirelli P Zero/Nero 225/50/16, "the d-baffle"...... | | | 07-08-2006, 11:21 PM | #11 | Member Join Date: Apr 2006 Location: Oklahoma City, OK Posts: 45 | Thank you Deadpan, thanks all of you guys. CaliTi, you're right at the first place. The only thing is it says it's for m44 engine and I got m42. Is it going to fit? | | | 07-10-2006, 08:33 PM | #12 | Senior Member Join Date: Apr 2005 Location: San Francisco Posts: 308 | http://www.pelicanparts.com/BMW/cata...FULint_pg3.htm I'm trying to find something to cross reference, but no luck. If they look similiar or nearly identical, you can always trim the hoses if to make them fit.....if they're too short, well.......maybe call Autohauz or dealer and see if they know. __________________ '99 ti /Mtechnic, Schwartz II, Meyle Control Arms w/Full Metal Ball Joints, PowerFlex poly LCAB's, Pirelli P Zero/Nero 225/50/16, "the d-baffle"...... | | | 07-10-2006, 08:44 PM | #13 | aka Stabby Join Date: Nov 2004 Location: Mead, CO Posts: 5,336 | realoem lists it for both m42 and m44. i did the original search for a 1995 m42 318ti. __________________ 1996 318ti, California package, 267k miles current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts 2002 X5 4.4 Sport Package, 53.5k miles Current Mods: e46 m3 steering wheel | | | 07-11-2006, 02:50 AM | #14 | Member Join Date: Apr 2006 Location: Oklahoma City, OK Posts: 45 | I ordered it from Autohaus....I hope it'll fit. Does anybody know if it is hard to replace those hoses? I personally think that it should be easy job. Anybody to prove me wrong? __________________ all stock '95 318ti m42 auto 150,000mi | | | 07-11-2006, 04:56 PM | #15 | Senior Member Join Date: Apr 2005 Location: San Francisco Posts: 308 | You'll have to remove the throttle body and maybe the upper half of the intake. Should be pretty obvious what may need to be removed as you get in there. Good luck. __________________ '99 ti /Mtechnic, Schwartz II, Meyle Control Arms w/Full Metal Ball Joints, PowerFlex poly LCAB's, Pirelli P Zero/Nero 225/50/16, "the d-baffle"...... | | | | Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | Posting Rules | You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |