318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Engine

Notices

Engine Tuneups, chips, wires, spark plugs.

.
» Recent Threads
1998 318ti
07-27-2022 05:31 PM
Last post by Falcowe
Today 07:06 PM
3 Replies, 1,899 Views
advise for selling my...
09-25-2022 05:29 PM
Last post by Greg_328ti
09-25-2022 05:29 PM
0 Replies, 365 Views
Glowing foot wells
05-12-2009 10:27 PM
Last post by runnr548
09-25-2022 05:45 AM
20 Replies, 3,873 Views
WTB 1998 CALI TOP
09-24-2022 12:29 PM
Last post by pvansickler
09-24-2022 12:29 PM
0 Replies, 254 Views
S52 Cams w/ M52 Valve...
07-26-2018 07:17 PM
Last post by StoneWheelRacing
09-23-2022 01:44 AM
3 Replies, 5,379 Views
names for your TI
10-08-2004 03:48 AM
Last post by StoneWheelRacing
09-23-2022 01:17 AM
353 Replies, 133,953 Views
WTB: Spare Tire and...
09-19-2022 02:59 AM
Last post by Beam318i
09-19-2022 02:59 AM
0 Replies, 931 Views
Connecting up a remote...
09-14-2022 04:06 AM
Last post by Hank
09-18-2022 02:13 PM
2 Replies, 1,309 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 08-03-2022, 06:15 PM   #1
far6car
Junior Member
 
Join Date: Nov 2018
Location: Ohio
Posts: 1
iTrader: (0)
Default checking for cracks in the block

The engine overheated. 204000 miles. The rear plastic coolant hose connection broke and coolant lost. I had the head removed and found a blown head gasket. Head gasket replaced, head surfaced .011, complete machine shop head rebuild, new valves and valve seals, head checked for cracks, none found, new head bolts. checked the block visually and with a straight edge, light sanded the block surface.
After reassembly, drove for 2 days, and overheated again. Had the coolant checked and found exhaust gas in the coolant. Will boil the coolant out after about 10 minutes of running. Also found crankcase vent valve not working.
I am resigned to taking the head off again. Is there a way to check the block for cracks without taking it to a machine shop and disassembling the block?
far6car is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
M50 Swap with Free M54 Block and Rotating assembly NeoMishMoo Engine 1 06-11-2016 01:09 PM
Flushing the Block During a Cooling System Rebuild uncledavid Lounge 2 03-21-2014 02:03 AM
M44 Block Warp? MikeLiv Engine 2 03-22-2012 07:23 PM
Oil leak and rubber block tyminski Engine 4 02-08-2011 02:31 PM
MN M44 Parts/M50 Non Vanos Head/E34 M50 Block mphmotorwerks US and North America 3 05-16-2010 03:25 PM


All times are GMT +1. The time now is 07:38 PM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2022, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 61.59 k/70.59 k (12.75%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.