WTT getrag brace for ZF brace

[wodcutr]

I am looking to trade my getrag manual transmission rear support brace for a ZF manual trans support brace as I am installing an m3 trans in my car. Both braces are very similar but the getrag one seems to be just a tad taller than the ZF. I don't want to have any fitment issues on my install. If you don't want to trade then pm me a price for yours. Thanks!

[ayton]

Originally Posted by wodcutr

I am looking to trade my getrag manual transmission rear support brace for a ZF manual trans support brace as I am installing an m3 trans in my car. Both braces are very similar but the getrag one seems to be just a tad taller than the ZF. I don't want to have any fitment issues on my install. If you don't want to trade then pm me a price for yours. Thanks!

do you have a part number for the one you want?

[wodcutr]

23702228014 M3. I don't know why this crossmember is used in the s52 cars only as the one I have was used on every other manual e36 including the ti and 95 m3. The only thing I can think of is maybe the s52 drive line is larger diameter and it needed more clearance but I doubt it!

23701136498 PN of the one I have