fuel line PITA

[fast2002]

I had to replace the injector rail main fual line on my 95 ti, located near the fire, the rubber line is about 3 inches long. I took off the top intake, no problem. But trying to put a clamp on the lower line took 4 hours plus what a bad design. Have anyone experienced this problem and is there a better way or has anyone come up with a best method or modifications?

[islandtime]

If you undo the clamp under the intake manifold that holds the metal pipe to the engine you can pull them up several inches and get to the clamps easily.

[fast2002]

Where is it located? I didn't see it. It's so congested under there? The water hoses are near the block. Is it under the hoses? Thanks.

[islandtime]

Its easier to get at from underneath but still not easy. You can follow the rubber lines up from the frame rail and they will connect to the metal lines, the attachment is just up from there.