Driver side trailing arm steel brake line PN?

[bazar01]

I was replacing all the 6 brake hoses on my 1996 yesterday and it was going very smoothly until the very last one on the rear gave me a hard time.

It was the one inside the driver side rear. The hex head got rounded even with the right 11mm fitting wrench and PB blaster. It was rusted out. I ended up not replacing this hose. The hose is hard and cracking.

The rounded fitting goes to the hard line mounted on the driver side trailing arm. I cannot seem to find the part number for the hard line from Pelican.
Can somebody assist with the part number. Thanks.

[bazar01]

Found it at RealOEM.
Item 9, PN 34326755592 - Pipe