replacing rear emblem

[CosTick]

my rear emblem is starting to loose color, i have another, just wondering what ill find underneath the screw covers on the hatch. i assume i have to take that off since my emblem seems to be screwed on from the inside, and thus the interior panel has to be lifted to replace. anyone done this able to comment?

[Coyoteh]

You can just pry it right off from the outside. I used an old credit card, worked perfectly. You might need new emblem grommets though.

[pdxmotorhead]

Yep just held on by rubber grommets. I use a 4" bakers spreading knife to get them off. Pop right off.

Dave

[teetime4one]

I used nylon straps from our shipping department at work. I fed it right up the middle (6 o'clock to 12 o'clock) then wiggled it out of the grommets. Worked like a charm.

[Trip_Douglas]

same for the hood emblem? are the sizes different btw e30, e36...ect?

[trikzta]

Same as the hood emblem

[Trip_Douglas]

ty

[Mr.Squeelerz]

I took a chainsaw and just cut around it, then used some Elmers glue and scotch tape to put it back together with a new one.

[Trip_Douglas]

haha

[1996 328ti]

I mounted mu GoPro on the Roundel.
Roundel popped right off.

[Trip_Douglas]

goProstill good?

[1996 328ti]

Originally Posted by Trip_Douglas

goProstill good?

It's fine.
When I removed the GoPro, the Roundel came off with it.

[Trip_Douglas]

I thought you meant you were filming a driving video with a GoPro and it flew off in a turn or slide or something. Hahahahaha

[1996 328ti]

Originally Posted by Trip_Douglas

I thought you meant you were filming a driving video with a GoPro and it flew off in a turn or slide or something. Hahahahaha

Nah. I don't drive that fast.
But I will be GoProing this weekend.