At 285km in 2011 in TORONTO, car transformed into this 325ti. An obd1 m50tu engine was used which had 180km and came from a 93 325is coupe. It has done less than 2o,ooo km since for a total of about 200000km. The cluster is from an (US) M3 with almost accurate engine mileage readings @114.000 MILES. The MPG (I just noticed the DIY on it!) does not work but everything else does and accurately so.
Pretty short gearing ie 120km=3500 rpm(change lsd if you wish for higher highway mileage) but comfy unless doing ILLEGAL speeds, and tolerable up to that point (which works out perfectly for everyone!) Everything works and car drives without issues.
The code reader pulled 2 codes - a. front right and left speed sensors and b. evap vent valve. Both of which will be addressed along with new pads, fluid, adjustments, replace the vent valve along with the charcoal canister, o2 sensor, safety and emissions tested
LOCATED IN CENTRAL TORONTO - COME AND DRIVE IT!!
as is $5600
safety emissions $6600
more
pm your offer ..... I am reasonable....
Toronto obd1 95 325ti 300km body 200km m50tu ..... 
Threaded Mode