» Site Navigation | | » Recent Threads | | | | | | 02-23-2012, 12:50 AM | #1 | Senior Member Join Date: Jan 2008 Location: New Orleans Posts: 970 | Water/Meth Injection Setups? I've searched and found a few results here/there but we should probably make a sticky for this, mainly for the s/c guys. what im looking for are: Pics parts/pieces used mixture your running/how much boost you push placement of tanks placement/quantity of spray jets used __________________ ^being rebuilt^ until then: daily car: 96' Blue DASC'd ti with koni coilovers slowly progressing... weekend car: 85 1/2' 944 Porsche no a/c, p/s, gutted cat, loud as hell exhaust, loud as hell sound system | | | 02-23-2012, 03:47 PM | #2 | Senior Member Join Date: Dec 2007 Location: Gulfport, Florida Posts: 3,208 | I run a Snow system and I'm sure I have many pictures of it installed on my DASC (.150 Jet). I also have it installed on my current turbo (.350 Jet). I run a 150psi pump controlled by a Snow manual controller. Comes on at 20psi 10% and 90% by 29psi. On the DASC I ran the smaller jet and hit it with Meth from 12psi (20%) to 16psi (100%). I've run Meth at 100%, 51/49 mix and run 100% Meth with Nitro. My farovite has always been 51(water)/49(Meth) injected at 12psi on DASC and anything over 20psi Turbo since my turbo is intercooler. I will look for pictures cause I know I have a lot of them and I have a hidden kit | | | 02-26-2012, 12:48 AM | #3 | Member Join Date: Jan 2009 Location: fort myers fl Posts: 73 | coolingmist has a very nice 2.5 gallon tank that intergrated the pump and contoller into it. cooling mist also has a sensor less system that watches the pumps pwm to detect loss of flow. plus there is a ton of n54 guys runing them in the 135/335 and have very little problems. | | | 02-26-2012, 02:37 AM | #4 | Senior Member Join Date: Jan 2005 Location: Louisiana Posts: 1,093 | That's the same kit I have . That hes looking to buy . __________________ was the 1 an only Bagged Ti on 19's!! | | | | Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | Posting Rules | You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |
All times are GMT +1. The time now is 08:53 AM.