 Meth injection dribble
Hi all
Just been checking over my meth injection system and noticed that once the pump cuts off it dribbles for about 3 seconds. It is not a couple of drops but a full dribble. Is this normal? I am not using a solenoid, but am using a check valve (Aquamist, so good quality). I replaced the check valve thinking that would be the problem, but that has not stopped it. Maybe I didn't notice it when using 100% water, but now with a 50/50 mix the decrease in viscosity makes it more noticeable? The check valve is about 3 inches from the spray nozzle so not too far.
Cheers
Dylan __________________
Supercharged 318Ti | 
Linear Mode
