Injector adapters

[denglish318ti]

Hi

Where is the best place to get these? I have tried emailing Metric Mechanics but not luck so far. Will give them a call in a bit.

Anywhere else? I see Vac Motorsports stock them, but at 80 dollars which is quite a lot. Is the MM price the same?

Cheers
Dylan

[bmwconnect]

Originally Posted by denglish318ti

Hi

Where is the best place to get these? I have tried emailing Metric Mechanics but not luck so far. Will give them a call in a bit.

Anywhere else? I see Vac Motorsports stock them, but at 80 dollars which is quite a lot. Is the MM price the same?

Cheers
Dylan

swap in a 92-93 lower half m42 manifold from the junk yard

[denglish318ti]

I have the DASC manifold which means I have to stick with that

[xxxJohnBoyxxx]

Ok I can get them from Metric. It takes a few calls and sometimes I call late at night since their shop phone is their home phone, don't abuse home phone please. They are super busy but I'm sure I can get the adapters for $80-$100 from them. I can send them to you or if you want I can give them your number and have them call you (for sure 100% call back), order and they will send to you.

You need those injector adapters so you can performance code your DME then put in any EV-1 style injector. Currently Barry has 30#, 42.8# (Lucas Blue Stripe ~ EV-1) and 60# (Delphi EV-1 ~ what I run) injector code. Killer stuff that runs perfect with the boost setting you choose.

[denglish318ti]

Cheers John, I managed to get through to Metric on the telephone and they sorted me out with them. The phone line was quite bad and I don't think they understood my English accent too well but they seemed like really nice guys! Should be able to get it remapped properly in a couple of months now. Thanks for the offer of shipping them to me. They said they were sending one of their tuned M20 engines to England too!

[denglish318ti]

MM sorted me out and they arrived a couple of days ago! Just need to get mapping sorted out now (the hard bit!)