Misc parts (Feeler) Metric Mechanic 2.1L FI motor - Page 2

**xxxJohnBoyxxx** · 12-02-2014, 09:37 PM

Parting out motor of whole car complete with new turbo charger for $3,000. Motor has bad head. Needs M44 head casting only, use all parts off crracked head since they are the best money can buy.

Short block~ M42 seasoned block, Bloack machines for V8 oil pump which is installed, 8:5:1 boost low ring pistions, H-beam roods (rated 500hp continous, 700hp bursts), M47 crank can handle 700hp constant, Single chain (light wieght) timing set with single tooth gears. Oil pan return for turbo welded behaind windage tray. $2,000

If parted out:

M47 stroker crank machined for a M4x block uncluded timing cover and balancer for damper CPS reading. $750

Big Bore throttle body. A little larger bore then a Dinan TB. $150 to your door

ZF Transmission with all shifter parts $300, shipping will be less then $90

2 drive shafts, standard 328i shaft and Byer HP shaft with changable u-joints. Best offer

4 point roll cage $125 you pay shipping

Complete turbo system with all piping cut to fit, Gizzmo controller, Complete kit nothing needed. $900

Med case LSD low mileage 3.23 gears. $200

Post for anything you want.

Artem · 12-12-2014, 01:01 AM

Is that a shipped number on the LSD? Im tempted... Running a 2.93 right now with an S52, suppose I could use a tad more off-the-line power.

Edit: Also interested in that rollcage! you got any pics of it?

**xxxJohnBoyxxx** · 12-15-2014, 11:48 PM

I will pick up half the shipping so I would think around $220 ~ $230 to your door. I have shipped a complete transmission for $90 so I don't think it will be a big expense. LSD has Amsoil with LSD treatment added to the gear oil.

This unit came out of a low mile 328i and I've used it maybe 30K miles, it is a solid unit.

Let me know, John S

Artem · 12-16-2014, 12:15 AM

That sounds like a really good deal! Any word on that roll cage?

**xxxJohnBoyxxx** · 12-17-2014, 07:45 PM

Quote:

Originally Posted by Artem

That sounds like a really good deal! Any word on that roll cage?

Cage Pictures taken today:

Artem · 12-18-2014, 02:17 AM

Id be really interested in getting the roll cage pending the shipping costs... Is it easy to install? My zip is 94131 (I Moved) :-P

Cheers,
Artem

**BlackBMWs** · 12-18-2014, 07:57 AM

I'll line up behind Artem if he passes on the rollcage.

Monkfish · 12-21-2014, 01:20 AM

Quote:

Originally Posted by xxxJohnBoyxxx

Complete turbo system with all piping cut to fit, Gizzmo controller, Complete kit nothing needed. $900

Interested if you part it out. Is this ready to bolt on to a stock 318ti? What is included?

**xxxJohnBoyxxx** · 12-22-2014, 04:27 AM

Quote:

Originally Posted by Monkfish

Interested if you part it out. Is this ready to bolt on to a stock 318ti? What is included?

Yes this will bolt on a 318ti. Here is my build thread which will show a lot of pictures of the parts: http://318ti.org/forum/showthread.php?t=27092

I will have a list of all parts soon as I'm completing a list of everything including the 2.1L stroker parts. The build thread should get you started. Also kit comes with two turbos exactly the same except one has a 3" compressor outlet and less then 400 miles. The other turbo has 30K miles and a 2" outlet on compressor

Artem · 12-22-2014, 07:18 AM

Really want that roll cage... let me know what the total would be with shipping

blatant · 12-22-2014, 02:06 PM

Lots of good stuff! Ill get in line for the cage if the other 2 fall through. What did the 3.23 come out of? Just curious.
good luck with sale!

**xxxJohnBoyxxx** · 12-23-2014, 04:06 PM

Quote:

Originally Posted by blatant

Lots of good stuff! Ill get in line for the cage if the other 2 fall through. What did the 3.23 come out of? Just curious.
good luck with sale!

Low mile 328i so the same LSD as a M3 but not banged on...

**xxxJohnBoyxxx** · 12-23-2014, 04:10 PM

Sorry guys but I listed the cage local and got about 8-9 people in line for it. I would rather sell local since buyer has to remove cage which is a total PITA. Cut welds, etc....

**xxxJohnBoyxxx** · 12-23-2014, 04:12 PM

I've got lots of real carbon parts that just need a clear coat. These are VIS parts which are not cheap but I'm selling cheap. Got two sets of rims ori 15" and a staggered set that are the ones shown on the car in all pictures

**xxxJohnBoyxxx** · 01-04-2015, 12:12 AM

Bump. Short block motor for sale. Metric Mechanic 2.1L stroker FI motor. Every possible option Metric offers is installed on this motor. Makes over 200hp without boost. 14.7psi of boost doubles the HP. Torque is over 405ftlb on 14.7psi. Will pull head and supply pictures. I believe only the head gasket is blown and will sell a complete running motor with new head gasket if buyer wants complete motor.

I have a full Spec stage 5 clutch kit installed, includes 9# billet flywheel, Stage 5 plate and matching pressure plate, for sale too.

Prefer PM or Email me: No1Be4Me@gmail.com

.	Powered by site supporters vBulletin Version 3.8.8 Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Copyright ©1999 - 2024, 318ti.org © vBadvanced CMPS v3.2.2 [page compression: 131.44 k/156.55 k (16.04%)]
318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.