 M44 into an E30
I have an M44 ready to go in to my E30. I am at least considering using all the M44 harness, ecu and ews and key from the donor car. I need a pin out of the connectors and maybe some advice from anyone that's deslt with obd2 swap info. I question whether my e30 tach will work, whether the check eng light will ever go out, whether it will run in closed loop and so on. I like the idea of a maf sensor over the afm and knock sensors esp since im up around 11.5 comp. I figure if I can look at the wiring schematic and what the pins are at the 3 connectors on the engine harness, I can figure out if its worth the effort.
Thanks for the help. | 
Threaded Mode