DASC, Koni, H & R and more Hello everyone, After many great years with my 1995 318ti, I have finally decided it is time for a change. Please see below for a list of the major items I am looking to sell. The rest of the car is also intact, so please ask if you are looking for something not listed. All items are located approximately 1 hour north of Toronto, Ontario, Canada. DASC kit, bought new from Chris at Understeer about 4 years ago, has approximately 20,000km on it. The kit comes complete with all hardware, intake manifold, filter, supercharger, rrfpr, check valve, brackets, ect... Asking $2200 SOLD! 3.4" Pulley boys pulley - new never installed. $45 SOLD Accel 30lb fuel injectors and adaptors - set of 4 including Metric Mechanic adaptors. SOLDNEW Koni SA shocks and struts - fronts purchased used on 318ti.org about 5 years ago and have since been rebuilt (may require another refresh). The rears were purchased new about 4 years ago. In total the set has seen 20-25,000km since I have owned them. SOLD for the set H&R sport springs, in good condition, again they have been on the car approximately 4 years and 20km. SOLD BMW M-tech sport springs - From a 95 club sport, purchased used about 5 years ago. Removed from the car after about a year of driving. $50 SOLD BMW M-tech anti-sway bars - same as the sport springs, have been on the car since purchased. Fairly rusty. $50 SOLD 1995 318ti Tail lamps - full set, no cracks $35 3.45LSD - diff was from a club sport originally, purchased used on 318ti.org. The unit was badly damaged when I received it. I rebuilt the diff using all new bearings (except pinnion bearing), seals and clutches and installed it into my original open diff casing. The diff has a slight pinnion bearing noise when cruising on the highway (the noise hasn't changed in the 5 years I have had it installed. $250 SOLD Brake calipers - E46 32X front calipers, in great working order. Can include rotors and some Hawk HP+ pads (40-50% remaining) SOLD Brake calipers - stock 318ti front calipers removed to install larger E46 setup. SOLD IE engine mounts - Urethane 318 engine mounts - $25 used for 2,000km SOLD If you are looking for something from a 95 M42 Ti and it is not listed, please let me know. PM IS KEY! I should have photos in the next day or two. Thanks Crispin Hudson Last edited by Montius; 02-13-2012 at 05:45 PM. |