318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Differentials

Notices

Differentials Limit Slip, gear ratio discussions.

.
» Recent Threads
1999 M-Sport For Sale
12-31-2023 05:10 PM
Last post by Coop540iT
03-23-2024 06:39 PM
1 Replies, 104,120 Views
Once again 318ti owner...
03-20-2024 12:39 PM
Last post by two30grain
03-22-2024 02:04 PM
1 Replies, 67,202 Views
What brakes do I...
03-20-2024 03:27 PM
Last post by huirtera
03-20-2024 03:27 PM
0 Replies, 64,466 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 08-15-2005, 03:34 PM   #1
L84THSKY
Senior Member
 
L84THSKY's Avatar
 
Join Date: Sep 2004
Location: Manassas, VA
Posts: 4,129
iTrader: (0)
Default M-coupe Diff Cover?

Where is the best deal on an M-coupe finned rear diff cover? Also, does the speedo sensor work for any diff to diff rear cover swap? I would prefer to just pop the sensor out of the cover that came with the diff, and put it in the M-coupe cover.
__________________

1998 (July) 318ti, 5-spd
OEM Armrest • Blaupunkt Heidelberg CD50 CD Player/Compact Drive MP3 Player • Diamond Audio 5.25" rear speakers • Navman ICN 530 GPS • BMWALARM.COM (with comfort settings) after market alarm system • Magnecor 8.5mm wires • M-Z3 Shifter/Momo Knob • Burlwood Dashboard • Stromung Exhaust • X-brace • Racing Dynamics Front Strut Bar • Carbonio C.A.I. • 17" Rial Rims • Vader Seats/Heated/Lumbar Support • M-tech Steering Wheel/Front Sway Bar/Front & Rear Bumper • Depos/w 6500K Angel Eyes/6000K HIDs • Clear Corners • M3 Mirrors • UUC Light Weight Flywheel/M5 Clutch/M3 Clutch Slave • E28 3.46 LSD/Mcoupe Cover/E30 Flanges & Halfshafts • UUC S.S. Brake/Clutch Lines • Hartge Roof Spoiler • BavAuto Springs• Bilstein Sport Struts/Shocks • E46 M3 Rear Shock Mounts • SPC Front Camber Kit • Reiger Hatch Spoiler • BavAuto Rear Camber Kit • Dinan Stage II Software • Turner Rear Sway Bar Reinforcements • BMW E46 Auto dimming mirror with Clown Nose alarm • Engine Compartment Light • Heated Wiper Fluid Retrofit • OEM Fire Extinguisher • Da'lan Trailer Hitch • Rear Sun Shade • OEM Fog Light Retrofit • H & R MZ3 Rear Sway Bar/ UUC Adjustable End Links • Cruise Control Retrofit • On Board Computer Retrofit • M3 twistie style side skirts • Carbon Fiber Hood
L84THSKY is offline   Reply With Quote
Old 08-15-2005, 05:31 PM   #2
cali-ti
aka Stabby
 
cali-ti's Avatar
 
Join Date: Nov 2004
Location: Mead, CO
Posts: 5,336
iTrader: (0)
Default

got mine on ebay from bimmerbum (he may still be out of the country though). think it was $175 + shipping so plan on about $200.

i BELIEVE the speedos are the same size. i bought a new one for the e30 diff i used (3.73) and it fit fine. the wire for the ti was a little tighter since you have to go further to reach the new sensor location.
__________________
1996 318ti, California package, 267k miles
current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray

acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts




2002 X5 4.4 Sport Package, 53.5k miles
Current Mods: e46 m3 steering wheel
cali-ti is offline   Reply With Quote
Old 08-23-2005, 07:42 PM   #3
L84THSKY
Senior Member
 
L84THSKY's Avatar
 
Join Date: Sep 2004
Location: Manassas, VA
Posts: 4,129
iTrader: (0)
Default

I just ordered mine from the same guy. I sure hope this diff swap goes smoothly. Someone on Bimmerforums said it took him 12 hrs with a buddy. But maybe they had more work than me. I'm just swapping diffs, that's all.

Quote:
Originally Posted by cali-ti
got mine on ebay from bimmerbum (he may still be out of the country though). think it was $175 + shipping so plan on about $200.

i BELIEVE the speedos are the same size. i bought a new one for the e30 diff i used (3.73) and it fit fine. the wire for the ti was a little tighter since you have to go further to reach the new sensor location.
__________________

1998 (July) 318ti, 5-spd
OEM Armrest • Blaupunkt Heidelberg CD50 CD Player/Compact Drive MP3 Player • Diamond Audio 5.25" rear speakers • Navman ICN 530 GPS • BMWALARM.COM (with comfort settings) after market alarm system • Magnecor 8.5mm wires • M-Z3 Shifter/Momo Knob • Burlwood Dashboard • Stromung Exhaust • X-brace • Racing Dynamics Front Strut Bar • Carbonio C.A.I. • 17" Rial Rims • Vader Seats/Heated/Lumbar Support • M-tech Steering Wheel/Front Sway Bar/Front & Rear Bumper • Depos/w 6500K Angel Eyes/6000K HIDs • Clear Corners • M3 Mirrors • UUC Light Weight Flywheel/M5 Clutch/M3 Clutch Slave • E28 3.46 LSD/Mcoupe Cover/E30 Flanges & Halfshafts • UUC S.S. Brake/Clutch Lines • Hartge Roof Spoiler • BavAuto Springs• Bilstein Sport Struts/Shocks • E46 M3 Rear Shock Mounts • SPC Front Camber Kit • Reiger Hatch Spoiler • BavAuto Rear Camber Kit • Dinan Stage II Software • Turner Rear Sway Bar Reinforcements • BMW E46 Auto dimming mirror with Clown Nose alarm • Engine Compartment Light • Heated Wiper Fluid Retrofit • OEM Fire Extinguisher • Da'lan Trailer Hitch • Rear Sun Shade • OEM Fog Light Retrofit • H & R MZ3 Rear Sway Bar/ UUC Adjustable End Links • Cruise Control Retrofit • On Board Computer Retrofit • M3 twistie style side skirts • Carbon Fiber Hood
L84THSKY is offline   Reply With Quote
Old 08-23-2005, 09:24 PM   #4
cali-ti
aka Stabby
 
cali-ti's Avatar
 
Join Date: Nov 2004
Location: Mead, CO
Posts: 5,336
iTrader: (0)
Default

you can't plan for the unknown. good luck!
__________________
1996 318ti, California package, 267k miles
current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray

acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts




2002 X5 4.4 Sport Package, 53.5k miles
Current Mods: e46 m3 steering wheel
cali-ti is offline   Reply With Quote
Old 08-24-2005, 01:54 PM   #5
L84THSKY
Senior Member
 
L84THSKY's Avatar
 
Join Date: Sep 2004
Location: Manassas, VA
Posts: 4,129
iTrader: (0)
Default

Did you replace any of the bolts that mount up the diff to the car or the flange bolts/nuts?

Quote:
Originally Posted by cali-ti
you can't plan for the unknown. good luck!
__________________

1998 (July) 318ti, 5-spd
OEM Armrest • Blaupunkt Heidelberg CD50 CD Player/Compact Drive MP3 Player • Diamond Audio 5.25" rear speakers • Navman ICN 530 GPS • BMWALARM.COM (with comfort settings) after market alarm system • Magnecor 8.5mm wires • M-Z3 Shifter/Momo Knob • Burlwood Dashboard • Stromung Exhaust • X-brace • Racing Dynamics Front Strut Bar • Carbonio C.A.I. • 17" Rial Rims • Vader Seats/Heated/Lumbar Support • M-tech Steering Wheel/Front Sway Bar/Front & Rear Bumper • Depos/w 6500K Angel Eyes/6000K HIDs • Clear Corners • M3 Mirrors • UUC Light Weight Flywheel/M5 Clutch/M3 Clutch Slave • E28 3.46 LSD/Mcoupe Cover/E30 Flanges & Halfshafts • UUC S.S. Brake/Clutch Lines • Hartge Roof Spoiler • BavAuto Springs• Bilstein Sport Struts/Shocks • E46 M3 Rear Shock Mounts • SPC Front Camber Kit • Reiger Hatch Spoiler • BavAuto Rear Camber Kit • Dinan Stage II Software • Turner Rear Sway Bar Reinforcements • BMW E46 Auto dimming mirror with Clown Nose alarm • Engine Compartment Light • Heated Wiper Fluid Retrofit • OEM Fire Extinguisher • Da'lan Trailer Hitch • Rear Sun Shade • OEM Fog Light Retrofit • H & R MZ3 Rear Sway Bar/ UUC Adjustable End Links • Cruise Control Retrofit • On Board Computer Retrofit • M3 twistie style side skirts • Carbon Fiber Hood
L84THSKY is offline   Reply With Quote
Old 08-24-2005, 03:36 PM   #6
cali-ti
aka Stabby
 
cali-ti's Avatar
 
Join Date: Nov 2004
Location: Mead, CO
Posts: 5,336
iTrader: (0)
Default

i refreshed the nuts that attach the drive shaft to the front of the diff, the bolts for mounting the diff in the carrier, as well as the bolts that attach the half shafts to the diff flanges (there are two types for the e30 flanges, but i'm not sure about the 318ti ones). you'll be getting all the bolts for the diff cover, but i also got the new speedo sensor and all hardware for attaching it. since i was swapping half shafts, i also refreshed the nuts/lock rings on the ends of the shafts. i basically refreshed (even got extras of a good number of them) all the mounting/attaching hardware i could. keep in mind the drive shaft nuts at the front of the diff are ONE TIME USE. fit it up there with your original nuts and then use the new ones to do the final attaching.
__________________
1996 318ti, California package, 267k miles
current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray

acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts




2002 X5 4.4 Sport Package, 53.5k miles
Current Mods: e46 m3 steering wheel
cali-ti is offline   Reply With Quote
Old 08-24-2005, 04:22 PM   #7
L84THSKY
Senior Member
 
L84THSKY's Avatar
 
Join Date: Sep 2004
Location: Manassas, VA
Posts: 4,129
iTrader: (0)
Default

Eric

I'm going through the parts list off realoem, and I'm not sure about the locking nuts for the drive shaft. Is it part #15 or #16? Part 16 uses some type of weighs along with the nuts/bolts.

http://www.realoem.com/bmw/showparts...05&hg=26&fg=10

Also, the halfshaft flange bolts use some sort of spacers, and two types of spacers are listed, part #2.

http://www.realoem.com/bmw/showparts...06&hg=33&fg=25
Quote:
Originally Posted by cali-ti
i refreshed the nuts that attach the drive shaft to the front of the diff, the bolts for mounting the diff in the carrier, as well as the bolts that attach the half shafts to the diff flanges (there are two types for the e30 flanges, but i'm not sure about the 318ti ones). you'll be getting all the bolts for the diff cover, but i also got the new speedo sensor and all hardware for attaching it. since i was swapping half shafts, i also refreshed the nuts/lock rings on the ends of the shafts. i basically refreshed (even got extras of a good number of them) all the mounting/attaching hardware i could. keep in mind the drive shaft nuts at the front of the diff are ONE TIME USE. fit it up there with your original nuts and then use the new ones to do the final attaching.
__________________

1998 (July) 318ti, 5-spd
OEM Armrest • Blaupunkt Heidelberg CD50 CD Player/Compact Drive MP3 Player • Diamond Audio 5.25" rear speakers • Navman ICN 530 GPS • BMWALARM.COM (with comfort settings) after market alarm system • Magnecor 8.5mm wires • M-Z3 Shifter/Momo Knob • Burlwood Dashboard • Stromung Exhaust • X-brace • Racing Dynamics Front Strut Bar • Carbonio C.A.I. • 17" Rial Rims • Vader Seats/Heated/Lumbar Support • M-tech Steering Wheel/Front Sway Bar/Front & Rear Bumper • Depos/w 6500K Angel Eyes/6000K HIDs • Clear Corners • M3 Mirrors • UUC Light Weight Flywheel/M5 Clutch/M3 Clutch Slave • E28 3.46 LSD/Mcoupe Cover/E30 Flanges & Halfshafts • UUC S.S. Brake/Clutch Lines • Hartge Roof Spoiler • BavAuto Springs• Bilstein Sport Struts/Shocks • E46 M3 Rear Shock Mounts • SPC Front Camber Kit • Reiger Hatch Spoiler • BavAuto Rear Camber Kit • Dinan Stage II Software • Turner Rear Sway Bar Reinforcements • BMW E46 Auto dimming mirror with Clown Nose alarm • Engine Compartment Light • Heated Wiper Fluid Retrofit • OEM Fire Extinguisher • Da'lan Trailer Hitch • Rear Sun Shade • OEM Fog Light Retrofit • H & R MZ3 Rear Sway Bar/ UUC Adjustable End Links • Cruise Control Retrofit • On Board Computer Retrofit • M3 twistie style side skirts • Carbon Fiber Hood
L84THSKY is offline   Reply With Quote
Old 08-24-2005, 04:51 PM   #8
AlaskaBlue
Senior Member
 
AlaskaBlue's Avatar
 
Join Date: Dec 2004
Location: Muncie, Indiana
Posts: 1,551
iTrader: (0)
Default

Cali-ti, how much faster does the car feel with a different diff? It is an upgrade I have been considering. 3.45-3.73
__________________
AlaskaBlue is offline   Reply With Quote
Old 08-24-2005, 04:55 PM   #9
cali-ti
aka Stabby
 
cali-ti's Avatar
 
Join Date: Nov 2004
Location: Mead, CO
Posts: 5,336
iTrader: (0)
Default

i got the nuts w/o weights (#15). i don't know what the differences between the reinforcements are (#2). you could either get both (3 per size i believe) or not bother as your originals will most likely be fine.
__________________
1996 318ti, California package, 267k miles
current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray

acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts




2002 X5 4.4 Sport Package, 53.5k miles
Current Mods: e46 m3 steering wheel
cali-ti is offline   Reply With Quote
Old 08-24-2005, 05:53 PM   #10
cali-ti
aka Stabby
 
cali-ti's Avatar
 
Join Date: Nov 2004
Location: Mead, CO
Posts: 5,336
iTrader: (0)
Default

it definitely feels a good bit faster. it's been called the "poor man's supercharger" ... i'm not sure i'd go that far, but it is noticeable with the butt-dyno

the big gain is the limited slip as you have much better traction. i need to find the relay for the traction control so i can disable it - it REALLY gets in the way when you have a LSD. i would re-enable it for snow, but otherwise i would prefer to have it off (and it resets everytime you turn the car off when using the switch inside - not to mention the large obnoxious hazard symbol in the cluster).

it WILL be more annoying at highway speeds, at least if you drive 80+mph. you'll be revving about 10% higher at any given speed. 80mph is now around 4000rpm or a little higher. if you're going to supercharge or drop in a 6, i wouldn't do the 3.73.
__________________
1996 318ti, California package, 267k miles
current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray

acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts




2002 X5 4.4 Sport Package, 53.5k miles
Current Mods: e46 m3 steering wheel
cali-ti is offline   Reply With Quote
Old 08-24-2005, 06:10 PM   #11
DustenT
doesn't care about you.
 
DustenT's Avatar
 
Join Date: Aug 2004
Location: Denver, CO
Posts: 3,925
iTrader: (0)
Default

Get a friend to help with the diff swap. It takes alot of time and strenght to get everything lined up right.
__________________

'99 Dinan M3
DustenT is offline   Reply With Quote
Old 08-24-2005, 06:18 PM   #12
L84THSKY
Senior Member
 
L84THSKY's Avatar
 
Join Date: Sep 2004
Location: Manassas, VA
Posts: 4,129
iTrader: (0)
Default

Funny you should say that. Unlike alot of you guys, I lived overseas for a decade, and then returned to Long Island. All of my high school friends are gone, and all I have is my night school (Married) friends. I can use my brother's lift, but he is probably too busy to help with the install. That leaves my girlfriend, and I doubt she will be much help.

I'm gonna get all the needed nuts and bolts, swap the rear cover and add the fluid. Then I will shop around to have the diff swapped. Since the halfshafts aren't being swapped, it shouldn't cost too much to have the diff swapped.

I'll keep you posted, have to make a few calls.

Quote:
Originally Posted by DustenT
Get a friend to help with the diff swap. It takes alot of time and strenght to get everything lined up right.
__________________

1998 (July) 318ti, 5-spd
OEM Armrest • Blaupunkt Heidelberg CD50 CD Player/Compact Drive MP3 Player • Diamond Audio 5.25" rear speakers • Navman ICN 530 GPS • BMWALARM.COM (with comfort settings) after market alarm system • Magnecor 8.5mm wires • M-Z3 Shifter/Momo Knob • Burlwood Dashboard • Stromung Exhaust • X-brace • Racing Dynamics Front Strut Bar • Carbonio C.A.I. • 17" Rial Rims • Vader Seats/Heated/Lumbar Support • M-tech Steering Wheel/Front Sway Bar/Front & Rear Bumper • Depos/w 6500K Angel Eyes/6000K HIDs • Clear Corners • M3 Mirrors • UUC Light Weight Flywheel/M5 Clutch/M3 Clutch Slave • E28 3.46 LSD/Mcoupe Cover/E30 Flanges & Halfshafts • UUC S.S. Brake/Clutch Lines • Hartge Roof Spoiler • BavAuto Springs• Bilstein Sport Struts/Shocks • E46 M3 Rear Shock Mounts • SPC Front Camber Kit • Reiger Hatch Spoiler • BavAuto Rear Camber Kit • Dinan Stage II Software • Turner Rear Sway Bar Reinforcements • BMW E46 Auto dimming mirror with Clown Nose alarm • Engine Compartment Light • Heated Wiper Fluid Retrofit • OEM Fire Extinguisher • Da'lan Trailer Hitch • Rear Sun Shade • OEM Fog Light Retrofit • H & R MZ3 Rear Sway Bar/ UUC Adjustable End Links • Cruise Control Retrofit • On Board Computer Retrofit • M3 twistie style side skirts • Carbon Fiber Hood
L84THSKY is offline   Reply With Quote
Old 08-24-2005, 07:24 PM   #13
L84THSKY
Senior Member
 
L84THSKY's Avatar
 
Join Date: Sep 2004
Location: Manassas, VA
Posts: 4,129
iTrader: (0)
Default

Just got a quote from a BMW specialist on Long Island. $450.00-$500.00 just to swap diffs. He said it is about a 5 hr job.

http://www.littlegarage.com/?drg=143-4204212367
__________________

1998 (July) 318ti, 5-spd
OEM Armrest • Blaupunkt Heidelberg CD50 CD Player/Compact Drive MP3 Player • Diamond Audio 5.25" rear speakers • Navman ICN 530 GPS • BMWALARM.COM (with comfort settings) after market alarm system • Magnecor 8.5mm wires • M-Z3 Shifter/Momo Knob • Burlwood Dashboard • Stromung Exhaust • X-brace • Racing Dynamics Front Strut Bar • Carbonio C.A.I. • 17" Rial Rims • Vader Seats/Heated/Lumbar Support • M-tech Steering Wheel/Front Sway Bar/Front & Rear Bumper • Depos/w 6500K Angel Eyes/6000K HIDs • Clear Corners • M3 Mirrors • UUC Light Weight Flywheel/M5 Clutch/M3 Clutch Slave • E28 3.46 LSD/Mcoupe Cover/E30 Flanges & Halfshafts • UUC S.S. Brake/Clutch Lines • Hartge Roof Spoiler • BavAuto Springs• Bilstein Sport Struts/Shocks • E46 M3 Rear Shock Mounts • SPC Front Camber Kit • Reiger Hatch Spoiler • BavAuto Rear Camber Kit • Dinan Stage II Software • Turner Rear Sway Bar Reinforcements • BMW E46 Auto dimming mirror with Clown Nose alarm • Engine Compartment Light • Heated Wiper Fluid Retrofit • OEM Fire Extinguisher • Da'lan Trailer Hitch • Rear Sun Shade • OEM Fog Light Retrofit • H & R MZ3 Rear Sway Bar/ UUC Adjustable End Links • Cruise Control Retrofit • On Board Computer Retrofit • M3 twistie style side skirts • Carbon Fiber Hood
L84THSKY is offline   Reply With Quote
Old 08-24-2005, 10:27 PM   #14
AlaskaBlue
Senior Member
 
AlaskaBlue's Avatar
 
Join Date: Dec 2004
Location: Muncie, Indiana
Posts: 1,551
iTrader: (0)
Default

wow your labor is expensive.. The BMW mechanics around here charge $50-75 an hour. Dealer charges $86.
__________________
AlaskaBlue is offline   Reply With Quote
Old 08-25-2005, 01:09 AM   #15
cali-ti
aka Stabby
 
cali-ti's Avatar
 
Join Date: Nov 2004
Location: Mead, CO
Posts: 5,336
iTrader: (0)
Default

that's about the rate i paid (around $80) in lake bluff, IL. my guys indicated they charged more per labor hour if you brought in your own parts (as they lose that parts income).
__________________
1996 318ti, California package, 267k miles
current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray

acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts




2002 X5 4.4 Sport Package, 53.5k miles
Current Mods: e46 m3 steering wheel
cali-ti is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Comprehensive Brake Info Thread RidingSimple Brakes 107 12-01-2021 08:14 PM


All times are GMT +1. The time now is 09:11 AM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 130.54 k/153.75 k (15.10%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.