Quote:
Originally Posted by Canadian  Two weeks after replacing the connectors i had another major leak loosing about half my coolant. Leak came from under the manifold so I tore it all down and all the hoses leading to the connectors are fine. No signs of leaking. This fixture that leads a hose to the Y looks questionable but I have no idea what it is.
Any opinions would be great thanks! |
It's been a while since you posted this, but that connector is for your heater valve. That plastic breaks too and will need to be replaced.
I've actually been tackling this job in sections and found that (since I don't have the automatic valve like you do) my heater core connection is broken too. Fortunately on the engine compartment side of the firewall, so that is another part to replace.
Just not looking forward to the squid re-assembly.
Threaded Mode