318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Induction

Notices

Induction Superchargers, NO2 and turbos.

.
» Recent Threads
1999 M-Sport For Sale
12-31-2023 05:10 PM
Last post by Coop540iT
03-23-2024 06:39 PM
1 Replies, 105,349 Views
Once again 318ti owner...
03-20-2024 12:39 PM
Last post by two30grain
03-22-2024 02:04 PM
1 Replies, 68,388 Views
What brakes do I...
03-20-2024 03:27 PM
Last post by huirtera
03-20-2024 03:27 PM
0 Replies, 65,626 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 12-30-2013, 07:14 AM   #1
rfrancis
Junior Member
 
Join Date: Dec 2013
Location: El Centro
Posts: 1
iTrader: (0)
Default M44 Valve Springs

Could anyone point me if this valve springs fit in the m44?

http://www.ebay.com/itm/C1-30152-08-...626cd5&vxp=mtr
rfrancis is offline   Reply With Quote
Old 01-02-2014, 12:27 AM   #2
xxxJohnBoyxxx
Senior Member
 
Join Date: Dec 2007
Location: Gulfport, Florida
Posts: 3,208
iTrader: (1)
Default

Compare the diameter and height with stock springs. If the diameter is the same then install one with valve and cam and check for coil bind and max lift. Intake cam sould have the highest lift but don't quote me on that. Best of luck
xxxJohnBoyxxx is offline   Reply With Quote
Old 01-04-2014, 11:05 PM   #3
xxxJohnBoyxxx
Senior Member
 
Join Date: Dec 2007
Location: Gulfport, Florida
Posts: 3,208
iTrader: (1)
Default

Another thing I noticed is you only purchased the intake springs in that ad. You need exhaust springs, retainers and keepers that will fit your valve design and lock the retainers in place or you will loose a valve in the cylinder and the motor will self destruct within seconds
xxxJohnBoyxxx is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
M42/44 / 318ti Valve Cover Gasket DIY. PICS! CirrusSR22 Knowledge Base 97 10-26-2022 10:12 PM
YOUR M44 Idle Control Valve Eric Engine 18 02-10-2014 04:20 PM
Head disassembled: what valve springs to use? jrw21 Induction 27 03-13-2013 01:32 AM
SAP (Secondary Air Pump) Repairs cali-ti Knowledge Base 5 01-23-2010 11:10 PM
Crank case ventilation valve on M44 with DASC, need pics and info nuvolarossa Induction 0 07-02-2007 03:52 PM


All times are GMT +1. The time now is 11:08 AM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 63.31 k/73.49 k (13.84%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.