» Site Navigation | | » Recent Threads | | | | | | | 12-01-2009, 09:49 PM | #1 | Senior Member Join Date: May 2007 Location: LA, Bellflower, CA Posts: 3,613 | M44 Parts; New and Used I started a new thread because the other one had too many pages and ppl might have forgotten about the new parts I have for the 318ti, M44. I have all these parts available. I might be able to match the same price as on pelicanparts.com lists them at, depending on which part. (all of these parts are brand new) 11251247916 - PISTON RING 11129070615 - HEAD GASKET KIT 11621435366 - EXHAUST MANIFOLD GASKET 11281437880 - E36 318 1.9 (M44), Z3 1.9 MAIN DRIVE BELT - 6PK-1733 11281470023 - E36 318, Z3 1.9/2.3/2.8, MZ3 A/C BELT - 4PK-889 11611734684 - INTAKE MANIFOLD GASKET to cylinder head 11611247478 - Intake Manifold GASKET 11737501180 - secondary air vaccum HOSE 11721433821 - Pressure Hose (for secondary air pump) 11131739813 - Oil Pan Gasket 11141247849 - TIMING GASKET 12141743197 - cable GUIDE for camshaft sensor wiring 12141748398 - O RING for camshaft sensor 11141432099 - Gasket set for upper and lower chaing case cover 11141743065 - GASKET SET timing cv 11151247903 - HOSE for back of cylinder to head 11141743032 - GASKET for lower chain case to engine block These are the extra parts I have as well: auto tranny rear diff (think the auto is 4.44) heated seats switches for the heated seats intake manifold (upper and lower) valve cover oil pan M44 coil pack OEM cat - Make an offer Radiator $60 (still in great condition, no leaks) MAF $50 Gauge Cluster (complete with white face and BLUE LEDs that light it up) SOLD alternator $100 Window switches with BLUE lighting SOLD engine harness cosmos racing cold intake $35SOLD engine harness __________________ -Theta Chi- Float like a cadilac, sting like a BIMMER .... my socket is just too thick and won't fit in the hole! damnit! Marv's 332ti is in the werks. Stay tuned ya'll ... Check list: S52 swap, manual transmission swap, 3.25 LSD with M Coupe diff cover, SuperSprint muffler, M3 style mirrors, AFE intake, ASC delete, M50 Manifold swap, UUC strut bar, ZHP lighted knob, Vaders, M-tech interior, OEM armrest, AC Schintzer front lip, AC Schnitzer rear spoiler, Roof spoiler, 18'' rims, M3 front drilled brakes, LED interior lights, 3 spoke Euro style steering wheel, OEM roof spoiler and bike holder, Thule fairing, Euro tail lights, oil pressure guage, carbon fiber hood painted to original paint (still showing CF weaving), what's next to do...? Last edited by Marv17; 01-26-2010 at 10:01 PM. | | | 12-10-2009, 09:44 PM | #2 | Senior Member Join Date: May 2007 Location: LA, Bellflower, CA Posts: 3,613 | bump. __________________ -Theta Chi- Float like a cadilac, sting like a BIMMER .... my socket is just too thick and won't fit in the hole! damnit! Marv's 332ti is in the werks. Stay tuned ya'll ... Check list: S52 swap, manual transmission swap, 3.25 LSD with M Coupe diff cover, SuperSprint muffler, M3 style mirrors, AFE intake, ASC delete, M50 Manifold swap, UUC strut bar, ZHP lighted knob, Vaders, M-tech interior, OEM armrest, AC Schintzer front lip, AC Schnitzer rear spoiler, Roof spoiler, 18'' rims, M3 front drilled brakes, LED interior lights, 3 spoke Euro style steering wheel, OEM roof spoiler and bike holder, Thule fairing, Euro tail lights, oil pressure guage, carbon fiber hood painted to original paint (still showing CF weaving), what's next to do...? | | | 12-20-2009, 07:50 PM | #3 | Senior Member Join Date: May 2007 Location: LA, Bellflower, CA Posts: 3,613 | bump. anyone need anything? __________________ -Theta Chi- Float like a cadilac, sting like a BIMMER .... my socket is just too thick and won't fit in the hole! damnit! Marv's 332ti is in the werks. Stay tuned ya'll ... Check list: S52 swap, manual transmission swap, 3.25 LSD with M Coupe diff cover, SuperSprint muffler, M3 style mirrors, AFE intake, ASC delete, M50 Manifold swap, UUC strut bar, ZHP lighted knob, Vaders, M-tech interior, OEM armrest, AC Schintzer front lip, AC Schnitzer rear spoiler, Roof spoiler, 18'' rims, M3 front drilled brakes, LED interior lights, 3 spoke Euro style steering wheel, OEM roof spoiler and bike holder, Thule fairing, Euro tail lights, oil pressure guage, carbon fiber hood painted to original paint (still showing CF weaving), what's next to do...? | | | 12-21-2009, 03:14 AM | #4 | Member Join Date: Sep 2009 Location: Bowling Green, OH Posts: 75 | Intake manifold gasket. Both of them. | | | 12-23-2009, 02:34 AM | #5 | Senior Member Join Date: Jun 2007 Location: Odenton, MD Posts: 419 | What do you want for the upper and lower intake manifolds? | | | 12-23-2009, 04:54 AM | #6 | Senior Member Join Date: May 2007 Location: LA, Bellflower, CA Posts: 3,613 | Quote: Originally Posted by gimp What do you want for the upper and lower intake manifolds? | i was thinking $60 was a fair price. __________________ -Theta Chi- Float like a cadilac, sting like a BIMMER .... my socket is just too thick and won't fit in the hole! damnit! Marv's 332ti is in the werks. Stay tuned ya'll ... Check list: S52 swap, manual transmission swap, 3.25 LSD with M Coupe diff cover, SuperSprint muffler, M3 style mirrors, AFE intake, ASC delete, M50 Manifold swap, UUC strut bar, ZHP lighted knob, Vaders, M-tech interior, OEM armrest, AC Schintzer front lip, AC Schnitzer rear spoiler, Roof spoiler, 18'' rims, M3 front drilled brakes, LED interior lights, 3 spoke Euro style steering wheel, OEM roof spoiler and bike holder, Thule fairing, Euro tail lights, oil pressure guage, carbon fiber hood painted to original paint (still showing CF weaving), what's next to do...? | | | 12-24-2009, 05:47 AM | #7 | Junior Member Join Date: Dec 2009 Location: Massachusetts Posts: 14 | hello, i was wondering if the cosmos racing cold air intake was still available? If so how much shipped to 02726 | | | 12-24-2009, 08:43 AM | #8 | Senior Member Join Date: May 2007 Location: LA, Bellflower, CA Posts: 3,613 | shipping would probably range in the $15 area. give or take a bit. i'll find out in a day or two. __________________ -Theta Chi- Float like a cadilac, sting like a BIMMER .... my socket is just too thick and won't fit in the hole! damnit! Marv's 332ti is in the werks. Stay tuned ya'll ... Check list: S52 swap, manual transmission swap, 3.25 LSD with M Coupe diff cover, SuperSprint muffler, M3 style mirrors, AFE intake, ASC delete, M50 Manifold swap, UUC strut bar, ZHP lighted knob, Vaders, M-tech interior, OEM armrest, AC Schintzer front lip, AC Schnitzer rear spoiler, Roof spoiler, 18'' rims, M3 front drilled brakes, LED interior lights, 3 spoke Euro style steering wheel, OEM roof spoiler and bike holder, Thule fairing, Euro tail lights, oil pressure guage, carbon fiber hood painted to original paint (still showing CF weaving), what's next to do...? | | | 12-24-2009, 02:35 PM | #9 | Member Join Date: May 2008 Location: Bainbridge,Pa. Posts: 48 | How much for OEM cat?Is it used? Thanks. | | | 12-24-2009, 02:58 PM | #10 | Junior Member Join Date: Dec 2009 Location: Massachusetts Posts: 14 | Quote: Originally Posted by Marv17 shipping would probably range in the $15 area. give or take a bit. i'll find out in a day or two. | Sounds good to me,also is it the intake with 3.5" pipe and what color is it? Thanks for the quick response, Alex Last edited by XxSmoothxXx318tixX; 12-24-2009 at 03:13 PM. | | | 12-24-2009, 08:54 PM | #11 | Senior Member Join Date: May 2007 Location: LA, Bellflower, CA Posts: 3,613 | Quote: Originally Posted by rustbucket How much for OEM cat?Is it used? Thanks. | $300 shipped. and yes it is used. Never threw a code or showed any signs of defect. Quote: Originally Posted by XxSmoothxXx318tixX Sounds good to me,also is it the intake with 3.5" pipe and what color is it? Thanks for the quick response, Alex | it is a 3.5" pipe. It was a dark blue but repainted it with heat resistant paint in a lighter Blue. but you can resand it to paint it. __________________ -Theta Chi- Float like a cadilac, sting like a BIMMER .... my socket is just too thick and won't fit in the hole! damnit! Marv's 332ti is in the werks. Stay tuned ya'll ... Check list: S52 swap, manual transmission swap, 3.25 LSD with M Coupe diff cover, SuperSprint muffler, M3 style mirrors, AFE intake, ASC delete, M50 Manifold swap, UUC strut bar, ZHP lighted knob, Vaders, M-tech interior, OEM armrest, AC Schintzer front lip, AC Schnitzer rear spoiler, Roof spoiler, 18'' rims, M3 front drilled brakes, LED interior lights, 3 spoke Euro style steering wheel, OEM roof spoiler and bike holder, Thule fairing, Euro tail lights, oil pressure guage, carbon fiber hood painted to original paint (still showing CF weaving), what's next to do...? | | | 12-25-2009, 06:58 AM | #12 | Junior Member Join Date: Dec 2009 Location: Massachusetts Posts: 14 | Quote: Originally Posted by Marv17 it is a 3.5" pipe. It was a dark blue but repainted it with heat resistant paint in a lighter Blue. but you can resand it to paint it. | perfect, thanks and will be ready to buy asap. Thanks and happy holidays everyone Alex | | | 12-25-2009, 03:15 PM | #13 | Member Join Date: May 2008 Location: Bainbridge,Pa. Posts: 48 | Should've asked before but how many miles? | | | 12-25-2009, 10:20 PM | #14 | Senior Member Join Date: May 2007 Location: LA, Bellflower, CA Posts: 3,613 | 174k miles i believe. __________________ -Theta Chi- Float like a cadilac, sting like a BIMMER .... my socket is just too thick and won't fit in the hole! damnit! Marv's 332ti is in the werks. Stay tuned ya'll ... Check list: S52 swap, manual transmission swap, 3.25 LSD with M Coupe diff cover, SuperSprint muffler, M3 style mirrors, AFE intake, ASC delete, M50 Manifold swap, UUC strut bar, ZHP lighted knob, Vaders, M-tech interior, OEM armrest, AC Schintzer front lip, AC Schnitzer rear spoiler, Roof spoiler, 18'' rims, M3 front drilled brakes, LED interior lights, 3 spoke Euro style steering wheel, OEM roof spoiler and bike holder, Thule fairing, Euro tail lights, oil pressure guage, carbon fiber hood painted to original paint (still showing CF weaving), what's next to do...? | | | 12-29-2009, 03:13 AM | #15 | Junior Member Join Date: Dec 2009 Location: Massachusetts Posts: 14 | when you get a final estimate and paypal address, i will send payment. Just moved funds, so all set. thanks, Alex | | | | | Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | Posting Rules | You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |