E30 3.73 LSD

GoTiGo · 04-22-2009, 12:52 AM

Hey everyone, I am considering getting an auto to manual swap done soon and would like to get an LSD in the process, I have considered an E30 3.73 LSD, and i'm wondering what all will be needed in order for the diff. swap to work, from reading various posts on here i assume that i will need the 3.73 LSD(obviously), E30 half shafts, MZ3 finned differential cover, and a z3 speed sensor. Are these all the parts i'd need, or are there a few things that i am missing please, Thanks!

**cooljess76** · 04-22-2009, 12:55 AM

This question has been answered a hundred times. I'll just say that you're wrong on your assumptions, try again.

http://www.318ti.org/forum/forumdisplay.php?f=32

GoTiGo · 04-22-2009, 12:58 AM

thanks for the link, i found a write up that had what i was looking for, I appreciate your help

.	Powered by site supporters vBulletin Version 3.8.8 Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Copyright ©1999 - 2024, 318ti.org © vBadvanced CMPS v3.2.2 [page compression: 67.73 k/79.33 k (14.62%)]
318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.