UUC delrin carrier bushings Has anyone else tried the UUC delrin shift carrier bushings from understeer? I used them when I installed my ebay SSK (which I love, by the way) and found they allowed more movement than the stock bushing. I also found an SSK which raises the pivot point of the shifter compounds this free play. I'm not sure if they sent me the wrong bushings or what. They fit the carrier ok, but there was a lot of free play between the ears on the trans and between the center of the bushings and the pin. I ended up maching my own bushing out of brass and made it fit very snugly. A test fit of the carrier showed no rotational free play at all. I'll be wrapping this up tonight with a new coupler and shaft seal. Just wanted to share my experience with this particular product. Scott |