Godspeed Coilover for E36 review

[eurohb]

This week I purchased a set of godspeed coilovers for the regular e36 suspension. I already knew the suspension wasn't going to fit the rear of the 318ti.. but I was wrong. The coilover set up fit nearly perfect with a slit cut to the rear spring pad and it fit.

Godspeed Project makes e36 coilovers that fit 100% for the Ti!
Features:
- Spring Rates, 6kg Front/ 8kg Rear
- 32 Levels of Dampening
- Mono-Tube Shock Design
- Power Coated Damper Body
- Ride height and spring preload are completely separate (Ride height can be changed without touching spring preload)
- Pillow Ball Mount with a spherical bearing
- Koyo Japan 6204z bearing
- Poly Urethane bushings (When Applicable)
- 53mm Monotube Shock
- One Year Warranty from date of purchase
https://godspeedproject.com/bmw-3-se...uspension.html


Box opened


Coilover Vs bilstein with a monospeed (I don't remember) Spring


New coilover


Rear set up

*Sorry for the greasy spring*


Bottom I cut the spring pad to allow the bottom plate to sit flush to hold the spring in place.



Top adjuster went in perfectly


All together !


Have to say I love the coilovers and ride quality!

[eurohb]

1/22 and these coilovers are still running amazing. Ran already 300+ miles on the coilovers and these are amazing. Had a few spirited drives and canyon runs and have nothing but good reviews. I have also ordered the m3 sway bar links to add more support and also will be adding the X-Brace from marv17

[jo_nathon]

I didn't find these on their site.

[wolferj-RIP]

Originally Posted by jo_nathon

I didn't find these on their site.

http://godspeedproject.com/bmw-3-ser...uspension.html

took about 3 clicks to locate...

[eurohb]

sorry James I should have done that for people


Sent from my iPhone using Tapatalk