» Site Navigation | | » Recent Threads | | | 1999 M3 Swap 09-07-2023 10:10 PM 06-01-2024 03:04 PM 7 Replies, 427,611 Views | | | | View Poll Results: What did you do? | Regulator was fine, replaced the clips | | 11 | 11.34% | Replaced regulator and the clips | | 33 | 34.02% | You the bent regulator back in place and replaced the clips | | 30 | 30.93% | You bent the regulator back in place, but had to re-repair it on a different occasion | | 23 | 23.71% | | | | 12-24-2004, 04:12 AM | #1 | Senior Member Join Date: Dec 2004 Location: Lake George, NY Posts: 338 | Window regulator This is about the mischevious Ti window regulator. I'm Just trying to find out how successful you guys were with your repairs. | | | 12-24-2004, 04:21 AM | #2 | Senior Member Join Date: Dec 2004 Location: Lake George, NY Posts: 338 | Oh yeah, i forgot about you lucky ones who haven't had any problems with their windows... wellll you can just get out of this thread because i don't want jinx you! | | | 12-24-2004, 11:18 PM | #3 | Senior Member Join Date: Mar 2004 Location: Virginia Posts: 368 | First time, driver's side, I replaced the regulator and clips and the missing rubber piece in the channel guide rail and straightened the guide rail. Second time, passenger's side, I bent the arms back into shape and replaced the clips. I think I'm only allowed to vote once so I used the first scenario. -Phil | | | 12-25-2004, 10:04 PM | #4 | Senior Member Join Date: Sep 2004 Location: New Jersey Posts: 363 | When I first got my ti, that was one of the first things I fixed. Also the control arm, actuators, balljoints, etc.... But I know a guy who is a mechanic at a BMW dealership so I went to him he took it in and fixed all that. But even though he did fix it and window does work tehre is still sometimes pauses in between. Like itll go up, pause, go up again... You know what i mean? __________________ RIP Tonka Hitlerietta 08/03/04 - 01/25/05 | | | 12-26-2004, 12:18 AM | #5 | Senior Member Join Date: Dec 2004 Location: Lake George, NY Posts: 338 | Quote: Originally Posted by durnadupa Like itll go up, pause, go up again... You know what i mean? | yeah my passenger side window is the one the broke but the driver side window does that same pausing crap.. | | | 12-26-2004, 08:20 AM | #6 | Senior Member Join Date: Aug 2003 Location: cary, nc Posts: 2,259 | my driver window did that pause crap... then today it fell into my door panel while i was driving home in 20 degree weather... im cold now... anyway...i didnt vote yet cause im not sure what will become of it... __________________ 1995 318ti Active Pioneer Speakers [] Aluminum Billet door locks [] ACS Pedals/Deadrest [] ACS Shift Knob / E-Brake Handle [] Clear Corners/Tails/Sides [] Sylvania Exterior Lighting [] Custom CAI [] Dinan Engine Chip [] Dinan Transmission Chip [] H&R Race Springs [] Tokico Illumina Shocks [] BMW X-Brace [] Relocated Lighter Mod [] Custom iPod Mod http://www.cardomain.com/id/robcarync | | | 12-26-2004, 08:21 AM | #7 | Senior Member Join Date: Aug 2003 Location: cary, nc Posts: 2,259 | road block...i dont have a t-20 torx screw driver...must wait until tomorrow or monday to get one from auto zone...why do i try and fix things at 2:22 am? __________________ 1995 318ti Active Pioneer Speakers [] Aluminum Billet door locks [] ACS Pedals/Deadrest [] ACS Shift Knob / E-Brake Handle [] Clear Corners/Tails/Sides [] Sylvania Exterior Lighting [] Custom CAI [] Dinan Engine Chip [] Dinan Transmission Chip [] H&R Race Springs [] Tokico Illumina Shocks [] BMW X-Brace [] Relocated Lighter Mod [] Custom iPod Mod http://www.cardomain.com/id/robcarync | | | 12-26-2004, 03:06 PM | #8 | Senior Member Join Date: Jun 2003 Location: Greenville, SC Posts: 9,356 | Be careful with those screws. They are different lengths. If you install them the wrong one screw will interfere with the regulator and bend it. BTDT. Also be gentle when you pull the door panel off. You don't wan't to pull the plastic parts that secure the panel to the door. __________________ ...steven BMW CCA #146825 1996 BMW 328ti • 2003 MINI Cooper S • 2016 M235i www.bmwcca.org | | | 12-26-2004, 06:55 PM | #9 | Senior Member Join Date: Sep 2004 Location: New Jersey Posts: 363 | When I got my regulator fixed the door panels were really loose to begin with, some clips were broken... the guy that I brought my car too fixed them and basically glued the door panels back on. Kinda sucks doesnt it? So if anything goes wrong inside of their now, I am royally screwed. __________________ RIP Tonka Hitlerietta 08/03/04 - 01/25/05 | | | 12-26-2004, 09:31 PM | #10 | Senior Member Join Date: Aug 2003 Location: cary, nc Posts: 2,259 | yeah im getting there...door panel off no problem...there was only 1 screw i removed from the door panel though...no plastic parts broken upon removal of panel... found the back window track in the bottom of the door panel(IE: no track to begin with!) i expected something to happen sometime because i noticed that when i shut my door i could hear the window rattling for the last few months...now i know it was because the glass was just chillin with no track...took me and my father a while to figure out what it was since we didnt know where it came from. we managed to find where it was mounted and put it back together... the window was jammed up and i had to remove the whole regulator from the panel because the arms were kind of in the up position and were wedged against the window (tearing my window tint). one arm was bent...but since i had no parts on me..i just straightened it out...one of the plastic clips were broken somewhat... so i ended up straightening the control arm...one slider track had NO grease at all and it stuck all the time... now both tracks are lubed up...im ordering some of the slider pieces from bavauto and i will replace the bad ones. but right now the window is in both tracks...newly straightened control arm...one bad slider...and tons of grease stuck on my window... one possible problem though...i notice that when i put the window up...it seems that the window kinda hits the top of the door frame, and then the motor still wants to go a little bit more...causing some tension there...i dont think it is suposed to do that... one possible explanation was this random 13mm bolt in the middle of the regulator...i took it off thinking it was bolting it to the door panel..but found out it was just attached to some little disk behind it...is this used to adjust something? could i have put it on in the wrong position? http://www.ohiomotorcycle.com/unders...windows-12.jpg the bolt that has the circle disk around it...on the right side...to the left of the motor...what does that do? __________________ 1995 318ti Active Pioneer Speakers [] Aluminum Billet door locks [] ACS Pedals/Deadrest [] ACS Shift Knob / E-Brake Handle [] Clear Corners/Tails/Sides [] Sylvania Exterior Lighting [] Custom CAI [] Dinan Engine Chip [] Dinan Transmission Chip [] H&R Race Springs [] Tokico Illumina Shocks [] BMW X-Brace [] Relocated Lighter Mod [] Custom iPod Mod http://www.cardomain.com/id/robcarync | | | 12-26-2004, 10:00 PM | #11 | Senior Member Join Date: Jun 2003 Location: Greenville, SC Posts: 9,356 | The window needs to relearn where to stop, I think. Also glue the rubber guide otherwise it will only get loose again. __________________ ...steven BMW CCA #146825 1996 BMW 328ti • 2003 MINI Cooper S • 2016 M235i www.bmwcca.org | | | 12-26-2004, 10:13 PM | #12 | Senior Member Join Date: Aug 2003 Location: cary, nc Posts: 2,259 | ahh i see the torx screw i didnt undo...cracked the plastic part it was screwed into but some all purpose epoxy will fix that... my problem wasnt just the rubber...the whole metal track that was suposed to hold the rubber came off of the bracket it is suposed to be bolted too and it was rattling around. the window seems to run smoothly now...assuming that the window just needs to relearn where to stop at. also...when i let the window all the way down...abot 1/4 inch sticks up from the door frame...i havent attactched the door panel yet so im sure the trim will hide it... other than that...all is well guys! thanks! __________________ 1995 318ti Active Pioneer Speakers [] Aluminum Billet door locks [] ACS Pedals/Deadrest [] ACS Shift Knob / E-Brake Handle [] Clear Corners/Tails/Sides [] Sylvania Exterior Lighting [] Custom CAI [] Dinan Engine Chip [] Dinan Transmission Chip [] H&R Race Springs [] Tokico Illumina Shocks [] BMW X-Brace [] Relocated Lighter Mod [] Custom iPod Mod http://www.cardomain.com/id/robcarync | | | 01-17-2005, 03:38 AM | #13 | Senior Member Join Date: Jan 2005 Location: boston Posts: 142 | where can i get the rear track for the driversside..the track broke off from the plate that had the screw on it..... i thought i was the onlyone with these problems.... __________________ HIOP TWINSCREW w/aftercooler water to air, 3.73 lsd,ported headdone,performence valve springs w/titanium retainersinstalled..nitrous kitinstalled fun fun X brace installed5th injector w/ piggyback controler, high flow cat | | | 01-17-2005, 07:27 AM | #14 | Senior Member Join Date: Aug 2003 Location: cary, nc Posts: 2,259 | passenger side window fell this time...YES!!!! the plastic clips are butchered...gotta get new ones...regulator seems to bend...the track needs grease... and of course i cant get the clips on a sunday...i just put the old broken clips in...rolled the window all the way up and put everything back together...window doesnt go up or down...but at least it is in track and out of the door panel __________________ 1995 318ti Active Pioneer Speakers [] Aluminum Billet door locks [] ACS Pedals/Deadrest [] ACS Shift Knob / E-Brake Handle [] Clear Corners/Tails/Sides [] Sylvania Exterior Lighting [] Custom CAI [] Dinan Engine Chip [] Dinan Transmission Chip [] H&R Race Springs [] Tokico Illumina Shocks [] BMW X-Brace [] Relocated Lighter Mod [] Custom iPod Mod http://www.cardomain.com/id/robcarync | | | 01-17-2005, 09:19 AM | #15 | Senior Member Join Date: Feb 2004 Location: Fort Worth, TX Posts: 234 | anyone else have to drill out the rivets that were attached the regulator? PITA! __________________ | | | | | Currently Active Users Viewing This Thread: 5 (0 members and 5 guests) | | Posting Rules | You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |