 M52 swap shifter question
Hey everyone. I got my swap finished and running. But the shifter position is less than desirable.
I still have the getrag that the 318ti came with
It seems like the shifter is pushed a little too far back and it barely will stay in 4 th gear.
I have done some research and it looks like getting a z3 shifter and the mount rod will help the positioning of the lever
After doing some searching it seems like I may need to bend the gear selector rod or shorten it. If I got the whole 1.9 z3 or the 2.5 shift assembly would this fix my problem?
I was just wanting to know what everyone else has done with their swaps
Also sorry if this is the wrong place for this thread. | 
Threaded Mode