[330ti: Project Clubsport] I originally posted this on bf.c thinking they'd help out a S50 easy, but no luck. Recently acquired a 330ti from a good friend Wayne and I'm slowly in the process of getting it to DD condition. Engine mods: 98k S50B30, TMS Stage 3 (schrick cams, injectors, chip, intake), headers, and Eisenmann catback. Probably more... Currently I am experiencing a RPM bounce when I'm coasting to a stop. The idle will dip low then bounce back up and level out when I've reached a complete stop. My old M44 used to behave this way when it had a dirty ICV, but I know that aftermarket cams can cause a rough idle at times. I don't know about the bounce though. There is no CEL, but the car is due for new plugs and an oil change for sure. The engine has 98k on it, and runs very strong, it just runs kinda rough I guess. |
Yeah, do the sparkplugs, clean the icv probly those are the most relavant.. Also camshaft position sensor if it is not cured... make sure to do the spark plugs when the car is cold.. aluminum block can expand when hot and you dont really wanna change plugs then even though last time i did it when it was pretty warm.. sooo. good luck let us know how it goes.. possibly new spark plug wires as a last resort. |
thanks dude |
Ced; Congrats on the new ti! First question is does the car have a LTW flywheel? I have the Fidanza 12lb flywheel and I get some idle flucuation when the engine revs drop down to under 1k. It's normal if the car has a ltw flywheel, the DME is compensating for the lower rotational mass... |
Pics of said "acquired" vehicle? Does it have a lightened flywheel and does the idle problem occur every time? I would also check for vacuum leaks or you could just drive it down to South Carolina and I'll get it all sorted for you. How does it compare to your car. That exhaust I sold you was made for these mods!! |
Wayne told me this never happened to him so it could be something that just stated happening. I'll get pics up soon, if anyone knew Gary from a couple years ago this used to be his (roll bar, brembos, recaros, ect...) |
Is this the black one I've see. On bf.c sig.. I'm In for more details... So far sounds :0 :0:0 |
Yeah, I didn't drive it much though. Sometimes I had to give it some gas to keep it from stalling when first starting up but otherwise I never had problems with the rpm's dropping. Idle was a bit rough but I figured that's the solid aluminum mounts and the shrick cams. I think I put 400 miles on it in 5 months though so it didn't see much road time. Pretty sure this ti has a ltw flywheel but I don't know the weight. It revs a good bit faster than my S52 M3 does. ...and yes.. once you get past 4500 rpm this ti is ":0 :0:0" :D |
Quote:
Quote:
|
Can I hazz this car.. I will fix and give back lol.. The rough idle is probably cuz of the cams.. |
Haha come on down from NJ we should hang. I hope its just the cams, but I'm going to make sure |
Dang Ced, I didn't know that ti had all those mods, that car must be a beast. |
Quote:
My m50 does the same crap specialy when it's cold. It idles stupid .. Idk if the cams would make the idle bounce/drop .. I know they will increase idle... But check the icv. And maybe a vacuum leak somewhere |
Let me know if you need any help man. random question, you going to sell your rims anytime soon? |
Quote:
which ones? |
your White M3 rims |
mm idk ..they look good on my car.. .. interested? |
they do look good on the car, PM me |
any luck? |
haven't been feeling well lately, I've got the week off and I plan on working on both the 328ti and the 330ti |
nice..the 328ti is obd2 or obd1? im goind obd1 on my m52 .. i sold the m50 well im actualy swaping it in a members car chekc the thread..:) |
the m52 is obdii. OBDI would be a hassle for no real gain for DD, plus emissions |
really no gains?? my car is already set for obd1..and since i have no cats i dont pass emissions anyway.. |
Quote:
|
im not planing on leaving it stock tho..maybe throw some s52 cams in there/chip |
thats legit bro |
any pictars on the new 330ti? |
I'll get some this week... its a black clubby with a primer bumper, could use some polish here and there. BTW anyone want to paint the bumper for me or trade for a black one? this one is pretty new |
ill trade you my bumper for the car if you want...lol i wish i had 2 ti's.. |
dude come to MD |
i would but im kinda bussy..+ w my new born baby and all the wife wouldnt let me scape to far lol and my car probably wouldnt make it that far before it explodes lols. |
LOL well then, where is your build thread bro |
http://www.318ti.org/forum/showthread.php?t=32362 this is what im doin curently.. i will ediit my old build thread when i get really started..just need time to park my car and start tearing apart |
really pics? |
coming up |
2 Attachment(s) |
|
only if you use a 6-point harness made of garden hose :biggrin: |
any updates on this? |
yeaaaaaaah it's about time I updated Day 1 - Interior Redo http://i183.photobucket.com/albums/x...o/IMG_3591.jpg http://i183.photobucket.com/albums/x...o/IMG_3592.jpg http://i183.photobucket.com/albums/x...o/IMG_3593.jpg http://i183.photobucket.com/albums/x...o/IMG_3593.jpg http://i183.photobucket.com/albums/x...o/IMG_3595.jpg http://i183.photobucket.com/albums/x...o/IMG_3599.jpg |
All times are GMT +1. The time now is 05:59 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org