Quote:
Originally Posted by ChItalian1027  All e36 318s came with a single exhaust tip. That Stromung is for a 6cyl if someone were to buy the exhaust they would have to cut the rear bumper to make it fit. The reason the rear springs won't fit is because the 318s came with an e30 rear end.
That is why the rear springs and exhaust won't work on the 318 unless you do an engine swap but then you'll have to customize the exhaust piping to make it fit to the car.
The Stromung will work on any e36 besides the 318 and the springs will work on any e36 besides the 318. But the front springs will work with any e36. |
The ti catback is ti specific, you can't fit a 318 sedan/coupe catback to a ti without extensive fab to the exhaust, or the mounting to the chassis.