Quote:
Originally Posted by xxxJohnBoyxxx If you wire it correctly it will work. You need to tap into the fan harness correctly for it to work. |
Thanks John, I was afraid that I would get an answer like that (only because I don't enjoy tracing through wiring schematics)...
I was hoping to get a freebie here with this one since both the front (pusher) and rear (puller) fans have the same 3 wire connector to the wire harness. I would say from doing a quick side by side comparison the condenser fan (front mounted-pusher) motor and fan blade is bigger. Also one obvious difference that I see is the radiator fan has a resistor, where as the condenser fan doesn't look like it has one.
I would think the function is the same meaning that the fan turns on when the engine gets hot & when the AC is running. I suppose the condenser fan draws more current since it is bigger.