» Site Navigation | | » Recent Threads | | | | | | 02-09-2013, 03:06 AM | #1 | Member Join Date: Mar 2012 Location: U.S.A. Posts: 41 | 328ti exhaust help Wondering what kind of set ups ppl are using in the 6cyl Ti's I have a 97 Ti | | | 02-09-2013, 03:27 AM | #2 | Senior Member Join Date: Jul 2007 Location: norcal - 94590 Posts: 3,186 | Flynn; I chose to run a custom exhaust from the post-header y-pipe back. Magnaflow racing cat and resonator with a Borla turbo muffler, 2.5" piping. Many threads here regarding exhausts for swaps. There is not really any easy bolt on solutions. You can utilize the mid-pipe section from any 6 cyl e36 and just have a custom job from the mid-pipe back. Pretty straight forward, any exhaust shop can do it. __________________ James 95 active w/leather interior and sport interior conversion, Vaders, full M-Tech exterior conversion. Now m50 swapped* Eibach sway bars, D2 Coilovers, Depo's w/AE's, blacked-out sides and grills, LeatherZ console and door armrests, 1 series starter button mod, and custom finished Style 5's <--- in this color! Named "Roddy": *M50 6 cyl. swap with fan delete, S50 cams and chip, AFE stage 2 intake, M3 clutch and 11.5 lb Fidanza flywheel, 3.15LSD, battery relocated to rear and complete custom exhaust. Sweet! 97 318ti sport, Alaska Blue, Contours, coilovers, Dove Vaders and custom black/grey interior named "Max" 95 318ti Active in Cosmos, S50 swap in progress... named "Pit" SUPPORT 318ti.org! CLICK THE LINK ABOVE! Hosting a forum like this is not free. 318ti.org is one of the best BMW forums on the web because it is member supported, not vendor supported. The cost to become a Supporter is a nominal $10.00... A YEAR! DO IT! NOW! | | | 02-09-2013, 03:31 AM | #3 | Member Join Date: Mar 2012 Location: U.S.A. Posts: 41 | Wondering what kind of set ups ppl are using in the 6cyl Ti's I have a 97 Ti and I want to put a 96 328is motor and trans in (I don't think years are important when it comes to exhausts once u know that both cars are obd2, but whatever) I want to have a plan for the exhaust once I do the swap I know I can always cut up the one from my donor car but that would be far from perfect and I don't want to lose torque with my driveway job I have herd that the system from a 2.8 z3 will bolt in perfectly Also herd that the header and muffler sections are the same in all 2.8's and the only thing I would need to change is the mid pipe The last thing I herd was that only the cat back needed to be swapped I'm not sure what to believe and any input on the subject is much appreciated Also I herd super sprint makes a system that's a perfect fit wondering about that and where it could be found | | | 02-09-2013, 03:38 AM | #4 | Senior Member Join Date: Jun 2003 Location: Greenville, SC Posts: 9,356 | You are killing me here. It's heard! I had a muffler shop weld some pipes from my cats to a 2 inlet Magnaflow with a single tip. I used http://www.summitracing.com/parts/MPE-12148/ In searching for my old thread, there are dozens of exhaust threads for conversions. __________________ ...steven BMW CCA #146825 1996 BMW 328ti • 2003 MINI Cooper S • 2016 M235i www.bmwcca.org Last edited by 1996 328ti; 02-09-2013 at 03:44 AM. | | | 02-09-2013, 03:50 AM | #5 | Member Join Date: Mar 2012 Location: U.S.A. Posts: 41 | Haha sry I've become to reliant on spellcheck But cool thanks for the help | | | 02-09-2013, 04:47 AM | #6 | Senior Member Join Date: Jul 2007 Location: norcal - 94590 Posts: 3,186 | Here are pics of my setup. (I'll save you the search) http://www.318ti.org/forum/showpost....&postcount=166 __________________ James 95 active w/leather interior and sport interior conversion, Vaders, full M-Tech exterior conversion. Now m50 swapped* Eibach sway bars, D2 Coilovers, Depo's w/AE's, blacked-out sides and grills, LeatherZ console and door armrests, 1 series starter button mod, and custom finished Style 5's <--- in this color! Named "Roddy": *M50 6 cyl. swap with fan delete, S50 cams and chip, AFE stage 2 intake, M3 clutch and 11.5 lb Fidanza flywheel, 3.15LSD, battery relocated to rear and complete custom exhaust. Sweet! 97 318ti sport, Alaska Blue, Contours, coilovers, Dove Vaders and custom black/grey interior named "Max" 95 318ti Active in Cosmos, S50 swap in progress... named "Pit" SUPPORT 318ti.org! CLICK THE LINK ABOVE! Hosting a forum like this is not free. 318ti.org is one of the best BMW forums on the web because it is member supported, not vendor supported. The cost to become a Supporter is a nominal $10.00... A YEAR! DO IT! NOW! | | | 02-09-2013, 04:54 AM | #7 | Member Join Date: Mar 2012 Location: U.S.A. Posts: 41 | Thanks I'm looking forward to my swap you guys have been a big help | | | 02-09-2013, 04:51 PM | #8 | Moderator Join Date: Mar 2007 Location: Maryland Posts: 3,220 | We are very big on searching here. Do as others have said: OEM Headers--->Midpipe (OBDII E36 328/M3) Midpipe--->Custom catback via Y-pipe OR Z3 catback | | | 02-10-2013, 01:02 AM | #9 | Member Join Date: Mar 2012 Location: U.S.A. Posts: 41 | cool thanks the i should be starting in a month or two | | | | Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | Posting Rules | You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |