I can't believe I have not updated this thread in so long...
Anyway, I spent some time on the black Club Sport today.
Dinan E36 M3 sway bar finally installed. The Dinan M3 front sway is actually stock sized but adjustable, full soft is just about stock, I set it to full stiff. I also had plans to install an M Coupe rear sway bar but someone beat me to it... In other news, I have an M Coupe rear sway bar for sale!
The cluster from the 325 had some intermittent issues with the display. Rather than fighting with that, a cluster from a 95 M3 went in.
I had plans to install new control arms and bushings as well. I wanted to test out some new control arms I can get from an OEM supplier... I took the arms out of the bag and found that one did not have the clip ring on the ball joint boot. The arms and bushings will have to wait for now but this is why I try products BEFORE selling them.
I also discovered that the engine mounts are not bolted in on the bottom side... yes for real... there is absolutely no nut on either side. The mounts themselves are leaking so they will be replaced very soon.